Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum RQ = 6.4 kΩ. However, previous implementations of superinductors, consisting of mesoscopic Josephson junction arrays, can introduce unintended nonlinearity or parasitic resonant modes in the qubit vicinity, degrading its coherence. Here we present a fluxonium qubit design using a granular aluminum (grAl) superinductor strip. Granular aluminum is a particularly attractive material, as it self-assembles into an effective junction array with a remarkably high kinetic inductance, and its fabrication can be in-situ integrated with standard aluminum circuit processing. The measured qubit coherence time T R 2 up to 30 µs illustrates the potential of grAl for applications ranging from protected qubit designs to quantum limited amplifiers and detectors. arXiv:1809.10646v1 [cond-mat.supr-con]

Image scanning microscopy (ISM) doubles the resolution of a conventional confocal microscope for super-resolution imaging. Here, we describe an all-optical ISM design based on rescanning microscopy for two-photon-excited fluorescence and second-harmonic generation that allows straightforward implementation into existing microscopes. The design offers improved sensitivity and high frame rates relative to those of existing systems. We demonstrate its utility using fixed and living specimens as well as collagen hydrogels.

The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Because of its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of nonlinearity for strongly driven quantum circuits, topological superconductivity, and hybrid systems. Having said that, can the grAl nonlinearity be sufficient to build a qubit? Here we show that a small grAl volume (10 × 200 × 500 nm 3) shunted by a thin film aluminum capacitor results in a microwave oscillator with anharmonicity α two orders of magnitude larger than its spectral linewidth Γ 01 , effectively forming a transmon qubit. With increasing drive power, we observe several multiphoton transitions starting from the ground state, from which we extract α ¼ 2π × 4.48 MHz. Resonance fluorescence measurements of the j0i → j1i transition yield an intrinsic qubit linewidth γ ¼ 2π × 10 kHz, corresponding to a lifetime of 16 μs, as confirmed by pulsed time-domain measurements. This linewidth remains below 2π × 150 kHz for in-plane magnetic fields up to ∼70 mT.

Hole-free phase plates (HFPPs), also known as Volta phase plates, were already demonstrated to be well suited for in-focus transmission electron microscopy imaging of organic objects. However, the underlying physical processes have not been fully understood yet. To further elucidate the imaging properties of HFPPs, phase shift measurements were carried out under different experimental conditions. Both positive and negative phase shifts occur depending on the diameter of the zero-order electron beam and the HFPP film temperature. The analysis of Thon ring patterns of an amorphous carbon test sample reveals that the phase-shifting patch can be significantly larger than the size of the zero-order beam on the HFPP film. An HFPP was used for in-focus phase contrast imaging of carbon nanotube (CNT) bundles under positive and negative phase-shifting conditions. The comparison of experimental and simulated images of CNT bundles gives detailed information on the phase shift profile, which depends on the spatial frequency in the vicinity of the zero-order beam. The shape of the phase shift profile also explains halo-like image artifacts that surround the imaged objects.

Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number n in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing n is generally observed to also monotonously increase these transition rates. Here we present a fluxonium artificial atom in which, despite the fact that the measured transition rates show nonmonotonous fluctuations within a factor of 6, for photon numbers up to n ≈ 200, the signal-to-noise ratio continuously improves with increasing n. Even without the use of a parametric amplifier, at n = 74, we achieve fidelities of 99% and 93% for feedback-assisted ground and excited state preparations, respectively. At higher n, leakage outside the qubit computational space can no longer be neglected and it limits the fidelity of quantum state preparation.