The influence of surface pit shape on 4H-SiC double implanted MOSFETs (DMOSFETs) reliability under a high temperature drain bias test has been investigated. Threading dislocations formed two types of pit shapes (deep pit and shallow pit) on an epitaxial layer surface. The cause of the failure was revealed to be an oxide breakdown above the pit generated at the threading mixed dislocation in both pit shapes. Weibull distributions between two types of pits were different. Although the DMOSFETs on the epitaxial layer with the deep pit show longer lifetime than those with the shallow pit, the epitaxial layer with the shallow pit is suitable to estimate the lifetime of the DMOSFETs because of a linearity of the Weibull plot. The lifetime of the DMOSFETs with the shallow pit was dominated by an oxide electric field. The maximum oxide electric field required to obtain the lifetime of more than 10 years was estimated to be 2.7 MV/cm.

No abstract

No abstract

V-groove trench MOSFETs with the 4H-SiC{0-33-8} face as the trench sidewall for the channel region have been investigated. The on-resistance and breakdown voltage strongly depend on the aperture ratio of the buried p + regions. The VMOSFETs with the buried p + regions of 71% on a 6-inch wafer exhibited a low specific on-resistance of 2.0 m cm 2 with 1200 V blocking voltage. The threshold voltage is 2.3 V at 175 o C, which shows the VMOSFETs have tolerability for an erroneous ignition under high temperature. The switching capability showed low switching losses over DMOSFETs on 4 o off 4H-SiC(0001) face and normal operation under fast switching repetitive test (40 Vns -1 ). The stability of the threshold voltage was demonstrated by HTGB tests. I.978-1-4799-6261-7/15/$31.00 ©2015 IEEE

The authors applied a thick gate oxide layer at the trench bottoms to 600 V class truncated V-groove MOSFETs of which MOS channels were formed on 4H-SiC (0-33-8) facets and validated the static and switching characteristics. The specific on-resistance and the threshold voltage were 3.6 mΩ cm2(VGS=18 V,VDS=1 V) and about 1 V (normally-off), respectively. The breakdown voltage of the MOSFET with a thick oxide layer was 1,125 V (IDS=1 μA). The switching losses during turn-on and turn-off operations were estimated to be 105.8 μJ and 82.5 μJ (300 V, 10 A) at room temperature. The switching characteristics exhibited low temperature dependence for turn-on/off time.