The discovery of ferroelectricity in thin doped hafnium oxide films revived the interest in ferroelectric (FE) memory concepts. Zirconium‐doped hafnium oxide (HZO) crystallizes at low temperatures (e.g., 400 °C), which makes this material interesting for the implementation of FE functionalities into the back end of line (BEoL). So far, the FE phase of prior amorphous HZO films is achieved by using a dedicated rapit thermal annealing (RTA) treatment. However, herein, it is shown that this dedicated anneal is not needed. A sole furnace treatment given by the thermal budget present during the interconnect formation is sufficient to functionalize even ultrathin 5 nm HZO films. This result helps to optimize the integration sequence of HZO films (e.g., involving a minimum number of BEoL process steps), which saves process time and fabrication costs. Herein, metal–FE–metal capacitors with Hf0.5Zr0.5O2 films of different thicknesses (5–20 nm) are fabricated annealed at 400 °C for various durations within different types of ovens (RTA and furnace). Structural and electrical characterization confirms that all furnace‐annealed samples have similar X‐ray diffraction patterns, remanent polarization, endurances, and thickness dependencies as RTA‐annealed ones. With respect to remanent polarization, leakage current, and endurance, the HZO film of 10 nm thickness shows the most promising results for the integration into the BEoL.

Research data are not shared.

The local crystal phase and orientation of ferroelectric grains inside TiN/Hf0.5Zr0.5O2/TiN have been studied by the analysis of the local electron beam scattering Kikuchi patterns, recorded in transmission. Evidence was found that the ferroelectric phase of the layers is derived from an orthorhombic phase, most likely of space group Pca21. The orientation analysis reveals a strong out-of-plane texture of the polycrystalline film which is in accordance with a high remanent polarization Pr observed for P-V measurements. The results of this analysis help us to further optimize the ratio of ferroelectric grains and their orientation for many applications, e.g., in the field of emerging memory or infrared sensors.

The microstructure of ferroelectric hafnium oxide plays a vital role for its application, e.g., non-volatile memories. In this study, transmission Kikuchi diffraction and scanning transmission electron microscopy STEM techniques are used to compare the crystallographic phase and orientation of Si and Zr doped HfO2 thin films as well as integrated in a 22 nm fully-depleted silicon-on-insulator (FDSOI) ferroelectric field effect transistor (FeFET). Both HfO2 films showed a predominately orthorhombic phase in accordance with electrical measurements and X-ray diffraction XRD data. Furthermore, a stronger texture is found for the microstructure of the Si doped HfO2 (HSO) thin film, which is attributed to stress conditions inside the film stack during crystallization. For the HSO thin film fabricated in a metal-oxide-semiconductor (MOS) like structure, a different microstructure, with no apparent texture as well as a different fraction of orthorhombic phase is observed. The 22 nm FDSOI FeFET showed an orthorhombic phase for the HSO layer, as well as an out-of-plane texture of the [111]-axis, which is preferable for the application as non-volatile memory.