A phase-field damage model for orthotropic materials is proposed and used to simulate delamination of orthotropic laminated composites. Using the deviatoric and hydrostatic tensile components of the stress tensor for elastic orthotropic materials, a degraded elastic free energy that can accommodate damage is derived. The governing equations follow from the principle of virtual power and the resulting damage model, by its construction, conforms with the physical relevant condition of no matter interpenetration along the crack faces. The model also dispenses with the traction separation law, an extraneous hypothesis conventionally brought in to model the interlaminar zones. The model is assessed through numerical simulations on delaminations in mode I, mode II, and another such problem with multiple initial notches. The present method is able to reproduce nearly all the features of the experimental load displacement curves, allowing only for small deviations in the softening regime. Numerical results also show forth a superior performance of the proposed method over existing approaches based on a cohesive law.

A state-based micropolar peridynamic theory for linear elastic solids is proposed. The main motivation is to introduce additional micro-rotational degrees of freedom to each material point and thus naturally bring in the physically relevant material length scale parameters into peridynamics. Non-ordinary type modeling via constitutive correspondence is adopted here to define the micropolar peridynamic material. Along with a general three dimensional model, homogenized one dimensional Timoshenko type beam models for both the proposed micropolar and the standard non-polar peridynamic variants are derived. The efficacy of the proposed models in analyzing continua with length scale effects is established via numerical simulations of a few beam and plane-stress problems.

a b s t r a c tA micropolar cohesive damage model for delamination of composites is proposed. The main idea is to embed micropolarity, which brings an additional layer of kinematics through the micro-rotation degrees of freedom within a continuum model to account for the micro-structural effects during delamination. The resulting cohesive model, describing the modified traction separation law, includes micro-rotational jumps in addition to displacement jumps across the interface. The incorporation of micro-rotation requires the model to be supplemented with physically relevant material length scale parameters, whose effects during delamination of modes I and II are brought forth using numerical simulations appropriately supported by experimental evidences.

No abstract

No abstract