No abstract

In the past decade, there have been exciting developments in the fi eld of lithium ion batteries as energy storage devices, resulting in the application of lithium ion batteries in areas ranging from small portable electric devices to large power systems such as hybrid electric vehicles. However, the maximum energy density of current lithium ion batteries having topatactic chemistry is not suffi cient to meet the demands of new markets in such areas as electric vehicles. Therefore, new electrochemical systems with higher energy densities are being sought, and metal-air batteries with conversion chemistry are considered a promising candidate. More recently, promising electrochemical performance has driven much research interest in Li-air and Zn-air batteries. This review provides an overview of the fundamentals and recent progress in the area of Li-air and Zn-air batteries, with the aim of providing a better understanding of the new electrochemical systems.

Nitrogen‐doped graphene (NG) is a promising metal‐free catalyst for the oxygen‐reduction reaction (ORR). A facile and low‐cost synthesis of NG via the pyrolysis of graphene oxide and urea is reported. The N content in NG can be up to 7.86%, with a high percentage of graphitic N (≈24%), which gives rise to an excellent catalytic activity toward the ORR.

A series of flexible nanocomposite electrodes were fabricated by facile electro-deposition of cobalt and nickel double hydroxide (DH) nanosheets on porous NiCo2O4 nanowires grown radially on carbon fiber paper (CFP) for high capacity, high energy, and power density supercapacitors. Among different stoichiometries of CoxNi1-xDH nanosheets studied, Co0.67Ni0.33 DHs/NiCo2O4/CFP hybrid nanoarchitecture showed the best cycling stability while maintaining high capacitance of ∼1.64 F/cm(2) at 2 mA/cm(2). This hybrid composite electrode also exhibited excellent rate capability; the areal capacitance decreased less than 33% as the current density was increased from 2 to 90 mA/cm(2), offering excellent specific energy density (∼33 Wh/kg) and power density (∼41.25 kW/kg) at high cycling rates (up to150 mA/cm(2)).

The carbothermal reduction of silica into silicon requires the use of temperatures well above the silicon melting point (> or =2,000 degrees C). Solid silicon has recently been generated directly from silica at much lower temperatures (< or =850 degrees C) via electrochemical reduction in molten salts. However, the silicon products of such electrochemical reduction did not retain the microscale morphology of the starting silica reactants. Here we demonstrate a low-temperature (650 degrees C) magnesiothermic reduction process for converting three-dimensional nanostructured silica micro-assemblies into microporous nanocrystalline silicon replicas. The intricate nanostructured silica microshells (frustules) of diatoms (unicellular algae) were converted into co-continuous, nanocrystalline mixtures of silicon and magnesia by reaction with magnesium gas. Selective magnesia dissolution then yielded an interconnected network of silicon nanocrystals that retained the starting three-dimensional frustule morphology. The silicon replicas possessed a high specific surface area (>500 m(2) g(-1)), and contained a significant population of micropores (< or =20 A). The silicon replicas were photoluminescent, and exhibited rapid changes in impedance upon exposure to gaseous nitric oxide (suggesting a possible application in microscale gas sensing). This process enables the syntheses of microporous nanocrystalline silicon micro-assemblies with multifarious three-dimensional shapes inherited from biological or synthetic silica templates for sensor, electronic, optical or biomedical applications.