Standard electrochemical data for high-quality, boron-doped diamond thin-film electrodes are presented. Films from two different sources were compared (NRL and USU) and both were highly conductive, hydrogen-terminated, and polycrystalline. The films are acid washed and hydrogen plasma treated prior to use to remove nondiamond carbon impurity phases and to hydrogen terminate the surface. The boron-doping level of the NRL film was estimated to be in the mid 1019 B/cm3 range, and the boron-doping level of the USU films was approximately 5 x 10(20) B/cm(-3) based on boron nuclear reaction analysis. The electrochemical response was evaluated using Fe-(CN)6(3-/4-), Ru(NH3)6(3+/2+), IrCl6(2-/3-), methyl viologen, dopamine, ascorbic acid, Fe(3+/2+), and chlorpromazine. Comparisons are made between the apparent heterogeneous electron-transfer rate constants, k0(app), observed at these high-quality diamond films and the rate constants reported in the literature for freshly activated glassy carbon. Ru(NH3)6(3+/2+), IrCl6(2-/3-), methyl viologen, and chlorpromazine all involve electron transfer that is insensitive to the diamond surface microstructure and chemistry with k0(app) in the 10(-2)-10(-1) cm/s range. The rate constants are mainly influenced by the electronic properites of the films. Fe(CN)6(3-/4-) undergoes electron transfer that is extremely sensitive to the surface chemistry with k0(app) in the range of 10(-2)-10(-1) cm/s at the hydrogen-terminated surface. An oxygen surface termination severely inhibits the rate of electron transfer. Fe(3+/2+) undergoes slow electron transfer at the hydrogen-terminated surface with k0(app) near 10(-5) cm/s. The rate of electron transfer at sp2 carbon electrodes is known to be mediated by surface carbonyl functionalities; however, this inner-sphere, catalytic pathway is absent on diamond due to the hydrogen termination. Dopamine, like other catechol and catecholamines, undergoes sluggish electron transfer with k0(app) between 10(-4) and 10(-5) cm/s. Converting the surface to an oxygen termination has little effect on k0(app). The slow kinetics may be related to weak adsorption of these analytes on the diamond surface. Ascorbic acid oxidation is very sensitive to the surface termination with the most negative Ep(ox) observed at the hydrogen-terminated surface. An oxygen surface termination shifts Ep(ox) positive by some 250 mV or more. An interfacial energy diagram is proposed to explain the electron transfer whereby the midgap density of states results primarily from the boron doping level and the lattice hydrogen. The films were additionally characterized by scanning electron microscopy and micro-Raman imaging spectroscopy. The cyclic voltammetric and kinetic data presented can serve as a benchmark for research groups evaluating the electrochemical properties of semimetallic (i.e., conductive), hydrogen-terminated, polycrystalline diamond.

International audienceThe electrochemical oxidation of carbon is a pivotal problem for low-temperature electrochemical generators, among which are proton-exchange membrane fuel cells (PEMFCs), and (non)aqueous-electrolyte Li-air batteries. In this contribution, the structure-sensitivity of the electrochemical corrosion of high-surface area carbon (HSAC) used to support catalytic materials in PEMFC electrodes is investigated in model (liquid electrolyte, 96 h potentiostatic holds at different electrode potentials ranging from 0.40 to 1.40 V at T = 330 K) and real PEMFC operating conditions (solid polymer electrolyte, 12,860 h of operation at constant current). Characterizations from Raman spectroscopy demonstrate that the disordered domains of HSAC supports (amorphous carbon and defective graphite crystallites) are preferentially oxidized at voltages related to the PEMFC cathode (0.40 < E < 1.00 V). Excursions to high electrode potential E > 1.00 V, witnessed during start-up and shut-down of PEMFC systems, accelerate this phenomenon and propagate the electrochemical oxidation to the graphitic domains of the HSAC. Thanks to X-ray photoelectron spectroscopy, a better understanding of the relationships existing between structural changes and carbon surface oxides coverage is also emerging for the first time