In modern economic conditions, the chosen technology of raw material processing and the choice of the necessary equipment for both the line as a whole and the oil press are of great importance in oil production. In small-capacity workshops, screw presses of various designs are used. The twin-screw extruder occupied a certain niche among the press equipment with a productivity of 150–500 kg/h. Their use can significantly simplify the technology of oilseed processing. They combine operations of heat treatment, grinding, and pressing of vegetable oil. It is important to study the influence of geometric parameters of the oil pressure path and screw nozzle on the oil yield. In twin-screw extruders, it is rational to choose the pitch of the worm, the width of the channel between the turns, the width of the crest of the turn and the length of the nozzle with variable geometrical parameters. The analysis and selection of geometrical parameters of working bodies of a twin-screw extruder on the basis of theoretical calculations are carried out. Two sets of experimental working bodies with the changed geometrical parameters are made. Their theoretical degree of compression is determined, which is 5.50, 4.69, and 4.33, respectively. It is experimentally confirmed that the oil yield depends on the degree of compression due to the geometric parameters of the screw. The effect of a sharp drop in the free volume of the screw on the energy performance and press extruder performance has been revealed. The general nature of the change in the free volume in the areas of nozzle groups is accompanied by an uneven decrease of 40–80% towards the release of oil cake. The nature of the change in the free volume of turns along the length of the screw shaft characterizes the correctness of its design. The selection of rational geometric parameters of the working bodies should be considered in combination with other design parameters, which will intensify the process of oil pressing.

The large varieties of hops and hop products used in the brewing industry. Various in the biochemical composition, individual approaches to the brewing technology of each hop product are required in order to obtain a high-quality beer with a characteristic bitter taste and aroma. The purpose of this work was to study the biochemical composition of pressed conical hops, pellets of hop type 90, type 45, ethanolic and CO2 extracts of hop of various varieties, and their influence on the quality of the finished beer. As a result of comprehensive research on hops and hop products of various varieties, using the modern biochemical methods were determined differences in their biochemical composition depend on the absolute values such parameters as the mass fraction of α-acids, b-acids and their composition, xanthohumol, general polyphenols, essential oils, the ratio of their valuable components of hops: b-acids to a-acids and also for quantity of general polyphenols, essential oils per unit of α-acids. Based on the results of the biochemical composition of hops and hop products were investigated their influence on the quality of beer and were determined their using in brewing.

The existing technology for the purification of diffusion juice and its hardware design has not fundamentally changed over the past four decades. The lack of the necessary theoretical developments and experimental data hinders the development of existing and the development of new technological processes. Therefore, the main direction of improving the purification efficiency of juices of sugar beet production is the disclosure of its unused reserves and their implementation in practice. The scientific problem of choosing the rational direction for improving the technology of juice purification, which ensures the production of consumer granulated sugar in the face of changes in a wide range of quality of raw materials, is relevant and has important economic importance, especially in the context of the transition of beet sugar factories to a market economy. One way to solve it is to make fuller use of the adsorption capacity of calcium carbonate particles while increasing the filtration properties of saturation sediments. Therefore, the study investigates the effect of cavitation effects – vapor condensation and hydrodynamic processing of diffusion juice on the processes of purification of diffusion juice, juices of preliminary defecation, first and second saturations. The analysis of the influence of various effects of cavitation processing of juices from the point of view of improving the purification efficiency, the optimal place of the purification process in the technological scheme of production is established.

The process of intensifying dehydration of pectin-containing raw materials by using centrifugation with simultaneous application of low-frequency oscillations to the working container creates an electroosmotic effect in unilateral diffusion to improve the filtration process. It is established that to reduce the technological resistance in the presented methods; it is necessary to create a fluidized bed of products due to the oscillating motion of the working capacity. An experimental vibration unit has been developed to determine the rational parameters of the vibrocentric moisture removal process using the electroosmotic effect. It is proved that the complex of the designed equipment provides consecutive carrying out of three-stage vibration filtration-convective drying of high-moisture production by an alternation of action of a stream of the heat carrier, an electromagnetic field, low-frequency fluctuations. According to the research results, the dependences of the kinetics of the moisture diffusion process on the electric field strength are obtained; frequency of electric current and duty cycle of pulses, which allowed to optimize the process parameters according to the criteria of minimizing energy consumption. It was found that the processing time to achieve the desired humidity with the application of vibration, filtration, and electroosmotic effect was twice less than for filtration drying in a fixed bed. In combination with the noted physical and mechanical factors, the proposed technology improves the technical and economic parameters of the studied process.

This scientific work describes research that aims to determine the physicochemical parameters of homogenized honey and its safety indicators based on the determination of toxic metals and radionuclides. A series of experimental studies were conducted to develop and study recipes for honey water based on different types of honey collected in the Lviv region of Ukraine, namely acacia, buckwheat, sunflower, coriander, goldenrod, linden, and weeds. According to the results of experiments, it was found that the studied honey meets all the requirements presented in the standard for natural honey. And the results obtained to determine the dry matter content and pH allowed to blend different types of honey and get honey drinks, which will expand the range of non-carbonated products, which is very popular, especially in summer, and drink this drink during the year. To prolong the shelf life of honey drinks, it is recommended to add citric acid in an amount of 1% by weight of the drink and sodium benzoate as a preservative in an amount of 0.1%. The quality of the obtained honey water samples was assessed using organoleptic evaluation and physicochemical parameters. The resulting beverages have good organoleptic characteristics and can be offered for products in the industry.