The ability to preserve and deliver reagents remains an obstacle for the successful deployment of self-contained diagnostic microdevices. In this study we investigated the ability of bacteriophage T7 to be encapsulated and preserved in water soluble nanofibers. The bacteriophage T7 was added to mixtures of polyvinylpyrrolidone and water and electrospun onto a grounded plate. Trehalose and magnesium salts were added to the mixtures to determine their effect on the infectivity of the bacteriophage following electrospinning and during storage. The loss of T7 infectivity was determined immediately following electrospinning and during storage using agar overlay plating and plaque counting. The results indicate that the addition of magnesium salts protects the bacteriophage during the relatively violent and high voltage electrospinning process, but is not as effective as a protectant during storage of the dried T7. Conversely, the addition of trehalose into the electrospinning mix has little effect on the electrospinning, but a more significant role as a protectant during storage.

This work demonstrates the ability to electrospin reagents into water-soluble nanofibers resulting in a stable on-chip enzyme storage format. Polyvinylpyrrolidone (PVP) nanofibers were spun with incorporation of the enzyme horseradish peroxidase (HRP). Scanning electron microscopy (SEM) of the spun nanofibers was used to confirm the non-woven structure which had an average diameter of 155 ± 34 nm. The HRP containing fibers were tested for their change in activity following electrospinning and during storage. A colorimetric assay was used to characterize the activity of HRP by reaction with the nanofiber mats in a microtiter plate and monitoring the change in absorption over time. Immediately following electrospinning, the activity peak for the HRP decreased by approximately 20%. After a storage study over 280 days, 40% of the activity remained. In addition to activity, the fibers were observed to solubilize in the microfluidic chamber. The chromogenic 3,3′,5,5′-tetramethylbenzidine solution reacted immediately with the fibers as they passed through a microfluidic channel. The ability to store enzymes and other reagents on-chip in a rapidly dispersible format could reduce the assay steps required of an operator to perform.

No abstract

No abstract

We have developed a capillary flow-driven microfluidic biosensor to meet the needs of diagnostics for resource-limited areas. The device combined elements of lateral flow assays and microfluidic technology resulting in a hybrid with benefits of both formats. The biosensor was achieved by bonding two pieces of polymethyl methacrylate with channels ablated by a CO 2 laser, and enclosing an absorbent pad. The channels were UV/ozone treated to increase hydrophilicity which enabled capillary flow. The absorbent pad allowed for continuous flow in the channels once filled. The application of biosensor was demonstrated by detection of DNA with a sandwich assay. The target DNA was hybridized with nucleic acid modified magnetic beads as well as Ru(bpy) 3 2? doped silica nanoparticles. Fluorescent signals were quantified in a holder fabricated to fit in a fluorescent microtiter plate reader. The capillary flow microfluidic was capable to detect 1 pmol target. The assay format which features rapid analysis and does not require the use of pumps could allow for inexpensive point of care diagnostics in the future.