No abstract

We demonstrate tunable Schottky barrier height and record photo-responsivity in a new-concept device made of a single-layer CVD graphene transferred onto a matrix of nanotips patterned on ntype Si wafer. The original layout, where nano-sized graphene/Si heterojunctions alternate to graphene areas exposed to the electric field of the Si substrate, which acts both as diode cathode and transistor gate, results in a two-terminal barristor with single-bias control of the Schottky barrier. The nanotip patterning favors light absorption, and the enhancement of the electric field at the tip apex improves photo-charge separation and enables internal gain by impact ionization. 2These features render the device a photodetector with responsivity (3 / for white LED light at 3 2 ⁄ intensity) almost an order of magnitude higher than commercial photodiodes. We extensively characterize the voltage and the temperature dependence of the device parameters and prove that the multi-junction approach does not add extra-inhomogeneity to the Schottky barrier height distribution.This work represents a significant advance in the realization of graphene/Si Schottky devices for optoelectronic applications.

On a scalable silicon technology platform, we demonstrate photodetectors matching or even surpassing state-of-the-art III–V devices. As key components in high-speed optoelectronics, photodetectors with bandwidths greater than 100 GHz have been a topic of intense research for several decades. Solely InP-based detectors could satisfy the highest performance specifications. Devices based on other materials, such as germanium-on-silicon devices, used to lag behind in speed, but enabled complex photonic integrated circuits and co-integration with silicon electronics. Here we demonstrate waveguide-coupled germanium photodiodes with optoelectrical 3-dB bandwidths of 265 GHz and 240 GHz at a photocurrent of 1 mA. This outstanding performance is achieved by a novel device concept in which a germanium fin is sandwiched between complementary in situ-doped silicon layers. Our photodetectors show internal responsivities of 0.3 A W−1 (265 GHz) and 0.45 A W−1 (240 GHz) at a wavelength of 1,550 nm. The internal bandwidth–efficiency product of the latter device is 86 GHz. Low dark currents of 100–200 nA are obtained from these ultra-fast photodetectors.

Filament-type HfO2-based RRAM has been considered as one of the most promising candidates for future non-volatile memories. Further improvement of the stability, particularly at the “OFF” state, of such devices is mainly hindered by resistance variation induced by the uncontrolled oxygen vacancies distribution and filament growth in HfO2 films. We report highly stable endurance of TiN/Ti/HfO2/Si-tip RRAM devices using a CMOS compatible nanotip method. Simulations indicate that the nanotip bottom electrode provides a local confinement for the electrical field and ionic current density; thus a nano-confinement for the oxygen vacancy distribution and nano-filament location is created by this approach. Conductive atomic force microscopy measurements confirm that the filaments form only on the nanotip region. Resistance switching by using pulses shows highly stable endurance for both ON and OFF modes, thanks to the geometric confinement of the conductive path and filament only above the nanotip. This nano-engineering approach opens a new pathway to realize forming-free RRAM devices with improved stability and reliability.

No abstract