The vast majority of gaseous chemical substances exhibit fundamental rovibrational absorption bands in the mid-infrared spectral region (2.5–25 μm), and the absorption of light by these fundamental bands provides a nearly universal means for their detection. A main feature of optical techniques is the non-intrusive in situ detection of trace gases. We reviewed primarily mid-infrared tunable laser-based broadband absorption spectroscopy for trace gas detection, focusing on 2008–2018. The scope of this paper is to discuss recent developments of system configuration, tunable lasers, detectors, broadband spectroscopic techniques, and their applications for sensitive, selective, and quantitative trace gas detection.

Phase measuring deflectometry (PMD) is a superior technique to obtain three-dimensional (3D) shape information of specular surfaces because of its advantages of large dynamic range, noncontact operation, full-field measurement, fast acquisition, high precision, and automatic data processing. We review the recent advances on PMD. The basic principle of PMD is introduced following several PMD methods based on fringe reflection. First, a direct PMD (DPMD) method is reviewed for measuring 3D shape of specular objects having discontinuous surfaces. The DPMD method builds the direct relationship between phase and depth data, without gradient integration procedure. Second, an infrared PMD (IR-PMD) method is reviewed to measure specular objects. Because IR light is used as a light source, the IR-PMD method is insensitive to the effect of ambient light on the measured results and has high measurement accuracy. Third, a proposed method is reviewed to measure the 3D shape of partial reflective objects having discontinuous surfaces by combining fringe projection profilometry and DPMD. Then, the effects of error sources that mainly include phase error and geometric calibration error on the measurement results are analyzed, and the performance of the 3D shape measurement system is also evaluated. Finally, the future research directions of PMD are discussed.

AbstarctWith the advent of intelligent manufacturing, phase measuring deflectometry (PMD) has been widely studied for the measurement of the three-dimensional (3D) shape of specular objects. However, existing PMDs cannot measure objects having discontinuous specular surfaces. This paper presents a new direct PMD (DPMD) method that measures the full-field 3D shape of complicated specular objects. A mathematical model is derived to directly relate an absolute phase map to depth data, instead of the gradient. Two relevant parameters are calibrated using a machine vision-based method. On the basis of the derived model, a full-field 3D measuring system was developed. The accuracy of the system was evaluated using a mirror with known positions along an accurate translating stage. The 3D shape of a monolithic multi-mirror array having multiple specular surfaces was measured. Experimental results show that the proposed DPMD method can obtain the full-field 3D shape of specular objects having isolated and/or discontinuous surfaces accurately and effectively.

Three-dimensional (3D) shape measurement based on fringe pattern projection techniques has been commonly used in various fields. One of the remaining challenges in fringe pattern projection is that camera sensor saturation may occur if there is a large range of reflectivity variation across the surface that causes measurement errors. To overcome this problem, a novel fringe pattern projection method is proposed to avoid image saturation and maintain high-intensity modulation for measuring shiny surfaces by adaptively adjusting the pixel-to-pixel projection intensity according to the surface reflectivity. First, three sets of orthogonal color fringe patterns and a sequence of uniform gray-level patterns with different gray levels are projected onto a measured surface by a projector. The patterns are deformed with respect to the object surface and captured by a camera from a different viewpoint. Subsequently, the optimal projection intensity at each pixel is determined by fusing different gray levels and transforming the camera pixel coordinate system into the projector pixel coordinate system. Finally, the adapted fringe patterns are created and used for 3D shape measurement. Experimental results on a flat checkerboard and shiny objects demonstrate that the proposed method can measure shiny surfaces with high accuracy.