Applications of cellulose nanomaterials (CNMs) have attracted increasing attention in recent years. One conceivable path lies in their commercial applications for packaging, in which their barrier properties will play an important role in determining their competiveness with conventional materials. This review critically analyzes the performance of CNMs acting as a barrier against moisture and oxygen permeation in CNM films, CNM-coated polymers and papers, and CNM-reinforced polymer composites, gives some insights into remaining challenges, and brings an overall perspective of compositing CNMs with other materials to achieve balanced properties adequate for barrier packaging. In general, CNMs are a poor moisture barrier but excellent oxygen barrier in the dry state and are still good below 65% relative humidity. The addition of CNMs can improve the oxygen barrier of the resulting polymer composites; however, neat CNM coatings and films can afford better oxygen barrier properties than dispersed CNMs in coatings and nanocomposites. The morphology and surface functionality of CNMs can be tailored to maximize the barrier performance of materials comprising them. The higher the surface charge density is of CNMs, the better is the barrier performance of coated polymers. Like other oxygen barriers such as ethylene vinyl alcohol and cellophane, the moisture sensitivity and sealability of CNMs can be improved by sandwiching them with high moisture-resistant and sealable polymers such as a polyolefin. A multilayered structure with layers of CNMs providing oxygen resistance covered by other layers of polymers providing moisture resistance and sealability might be competitive in barrier packaging markets dominated by synthetic plastics.

No abstract

The use of wood-derived fillers by the thermoplastic industry has been growing, fueled in part by the use of wood-fiberthermoplastic composites by the construction industry. As a result, the durability of wood-fiber-thermoplastic composites after ultraviolet exposure has become a concern. Samples of 100% high-density polyethylene (HDPE) and HDPE filled with 50% woodflour (WF) were weathered in a xenon arc-type accelerated weathering apparatus for 2000 h. Changes in surface chemistry were studied using spectroscopic techniques. X-ray photoelectron spectroscopy (XPS) was used to verify the occurrence of surface oxidation. Fourier transform infrared (FTIR) spectroscopy was used to monitor the development of degradation products, such as carbonyl groups and vinyl groups, and to determine changes in HDPE crystallinity. The results indicate that surface oxidation occurred immediately after exposure for both the neat HDPE and WF/HDPE composites; the surface of the WF/HDPE composites was oxidized to a greater extent than that of the neat HDPE. This suggests that the addition of WF to the HDPE matrix results in more weather-related damage. The results also show that while neat HDPE may undergo crosslinking in the initial stages of accelerated weathering, WF may physically hinder the ability of HDPE to crosslink, resulting in the potential for HDPE chain scission to dominate in the initial weathering stage.

No abstract