We report the specific transduction, via surface stress changes, of DNA hybridization and receptor-ligand binding into a direct nanomechanical response of microfabricated cantilevers. Cantilevers in an array were functionalized with a selection of biomolecules. The differential deflection of the cantilevers was found to provide a true molecular recognition signal despite large nonspecific responses of individual cantilevers. Hybridization of complementary oligonucleotides shows that a single base mismatch between two 12-mer oligonucleotides is clearly detectable. Similar experiments on protein A-immunoglobulin interactions demonstrate the wide-ranging applicability of nanomechanical transduction to detect biomolecular recognition.

This paper describes the characterization of a home-made negative photoresist developed by IBM. This resist, called SU-8, can be produced with commercially available materials. Three blends were prepared for this article and some of its optical and mechanical properties are presented. One of its numerous advantages is the broad range of thicknesses which can be obtained in one spin: from 750 nm to 450 µm with a conventional spin coater. The resist is exposed with a standard UV aligner and has an outstanding aspect ratio near 15 for lines and 10 for trenches. These ratios combined with the electroplating of copper allow the fabrication of highly integrated electromagnetic coils.

We present a new scanning-probe-based data-storage concept called the "millipede" that combines ultrahigh density, terabit capacity, small form factor, and high data rate. Ultrahigh storage density has been demonstrated by a new thermomechanical local-probe technique to store, read back, and erase data in very thin polymer films. With this new technique, nanometer-sized bit indentations and pitch sizes have been made by a single cantilever/tip into thin polymer layers, resulting in a data storage densities of up to 1 Tb/in 2 . High data rates are achieved by parallel operation of large two-dimensional (2-D) atomic force microscope (AFM) arrays that have been batch-fabricated by silicon surface-micromachining techniques. The very large-scale integration (VLSI) of micro/nanomechanical devices (cantilevers/tips) on a single chip leads to the largest and densest 2-D array of 32 32 (1024) AFM cantilevers with integrated write/read/erase storage functionality ever built. Time-multiplexed electronics control the functional storage cycles for parallel operation of the millipede array chip. Initial areal densities of 100-200 Gb/in 2 have been achieved with the 32 32 array chip, which has potential for further improvements. A complete prototype system demonstrating the basic millipede functions has been built, and an integrated five-axis scanner device used in this prototype is described in detail. For millipede storage applications the polymer medium plays a crucial role. Based on a systematic study of different polymers with varying glass-transition temperatures, the underlying physical mechanism of bit writing has been identified, allowing the correlation of polymer properties with millipede-relevant parameters. In addition, a novel erase mechanism has been established that exploits the metastable nature of written bits.Index Terms-Atomic force microscope (AFM) array chips, microscanner, millipede, nano-indentation, polymer films, scanning probe data storage, thermomechanical write/read/erase.

No abstract

No abstract