No abstract

Projection systems have found widespread use in conference rooms and other professional applications during the last decade and are now entering the home TV market at a considerable pace. Projectors as small as about one litre are able to deliver several thousand screen lumens and are, with a system efficacy of over 10 lm W −1 , the most efficient display systems realized today. Short arc lamps are a key component for projection systems of the highest efficiency for small-size projection displays. The introduction of the ultra high performance (UHP) lamp system by Philips in 1995 can be identified as one of the key enablers of the commercial success of projection systems. The UHP lamp concept features outstanding arc luminance, a well suited spectrum, long life and excellent lumen maintenance. For the first time it combines a very high pressure mercury discharge lamp with extremely short and stable arc gap with a regenerative chemical cycle keeping the discharge walls free from blackening, leading to lifetimes of over 10 000 h. Since the introduction of the UHP lamp system, many important new technology improvements have been realized: burner designs for higher lamp power, advanced ignition systems, miniaturized electronic drivers and innovative reflector concepts. These achievements enabled the impressive increase of projector light output, a remarkable reduction in projector size and even higher optical efficiency in projection systems during the last years. In this paper the concept of the UHP lamp system is described, followed by a discussion of the technological evolution the UHP lamp has undergone so far. Last, but not least, the important improvements of the UHP lamp system including the electronic driver and the reflector are discussed.

We report measurements on diffusion of CO2 and Ar in aged and conditioned (exposed to high CO2 pressure) samples of BPA-PC. In contrast to intuitive expectations and some previous experimental results on diffusion of larger molecules in polymer glasses, diffusion in a "more open" conditioned matrix is slower than in a denser aged one. We offer an explanation of this effect based on the recently developed site distribution model for sorption and transport of small molecules in polymer glasses. The observed modification of diffusion rates could be described in terms of increasing activation energy for gas diffusion in conditioned in comparison with aged samples. This difference of activation energies could be understood through changes in free volume distribution, which were evaluated from the measured sorption isotherms.

Easy system design, compactness and a uniform power distribution define the basic advantages of high power VCSEL systems. Full addressability in space and time add new dimensions for optimization and enable "digital photonic production". Many thermal processes benefit from the improved control i.e. heat is applied exactly where and when it is needed. The compact VCSEL systems can be integrated into most manufacturing equipment, replacing batch processes using large furnaces and reducing energy consumption. This paper will present how recent technological development of high power VCSEL systems will extend efficiency and flexibility of thermal processes and replace not only laser systems, lamps and furnaces but enable new ways of production.High power VCSEL systems are made from many VCSEL chips, each comprising thousands of low power VCSELs. Systems scalable in power from watts to multiple ten kilowatts and with various form factors utilize a common modular building block concept. Designs for reliable high power VCSEL arrays and systems can be developed and tested on each building block level and benefit from the low power density and excellent reliability of the VCSELs. Furthermore advanced assembly concepts aim to reduce the number of individual processes and components and make the whole system even more simple and reliable.

Thermal treatment may be by far the most frequent process used in manufacturing, but only at a few places lasers could make an inroad. For thermal treatment, homogeneous illumination of large areas at a lower brightness, and accurate temporal as well as spatial control of the power is required. This is complicated for conventional high-power lasers, while vertical-cavity surface emitting laser-diode (VCSEL) arrays inherently have these capabilities. Because of their fast switching capability and low power dissipation, VCSELs have been widely used for datacom and sensing applications. By forming large-area arrays with hundreds of VCSELs per mm2, their use can be further expanded to high-power applications. In this way, power densities of several W/mm2 are achieved, making the VCEL arrays an ideal solution for many heating applications, ranging from melting and welding of plastics and laminates to curing, drying, and sintering of coatings. A turn-key system concept has been developed allowing fast and easy configuring systems to the specifications of the applications. The compact and robust system can be built directly into the manufacturing equipment, thus making expensive fibers and homogenizing optics superfluous. These systems are now finding their first inroads into industrial applications and have been designed-in into commercially available production machines.