One-dimensional polarization-independent grating couplers are demonstrated with the aid of the adaptive genetic algorithm optimization. By adjusting the relative weight between the coupling efficiency and the bandwidth of the polarization-dependent loss (PDL), we control the evolution direction and customize the final performance of the device. Two specific designs are generated by giving more weight to the coupling efficiency and the PDL bandwidth, respectively. Coupling efficiencies of the first design are measured to be
−
7.6
d
B
and
−
7.9
d
B
at 1550 nm for TE and TM polarizations, respectively, while its 1.0 dB PDL bandwidth is 25.0 nm. In contrast, the second design presents higher coupling efficiencies of
−
7.6
d
B
and
−
7.2
d
B
at 1550 nm for TE and TM polarizations, respectively. However, its 1.0 dB PDL bandwidth is 22.0 nm.
Reconfigurable optical add-drop filters in future intelligent and software controllable wavelength division multiplexing networks should support hitless wavelength switching and gridless bandwidth tuning. The hitless switching implies that the central wavelength of one channel can be shifted without disturbing data transmissions of other channels, while the gridless tuning means that the filter bandwidth can be adjusted continuously. Despite a lot of efforts, very few integrated optical filters simultaneously support the hitless switching of central wavelength and the gridless tuning of bandwidth. In this work, we demonstrate a hitless add-drop filter with gridless bandwidth tunability on the silicon-on-insulator (SOI) platform. The filter comprises the two identical multimode anti-symmetric waveguide Bragg gratings (MASWBG) which are connected to a loop. The phase apodization technique is utilized to weaken the intrinsic sidelobe interference of grating-based devices. By sequentially manipulating central wavelengths of the two MASWBGs with the thermo-optical effect, we can reconfigure the spectral response of the filter gridlessly and hitlessly. Specifically, the central wavelength of the device is shifted by 14.5 nm, while its 3 dB bandwidth is tuned from 0.2 nm to 2.4 nm. The dropping loss and the sidelobe suppression ratio (SLSR) are dependent on the bandwidth selected. Measured variation ranges of dropping loss and SLSR are from -1.2 dB to -2.5 dB and from 12.8 dB to 21.4 dB, respectively. The hitless wavelength switching is verified by a data transmission measurement at a bit rate of 25 Gbps.
We demonstrate a high efficiency, high linearity and high-speed silicon Mach-Zehnder modulator based on the DC Kerr effect enhanced by slow light. The two modulation arms based on 500-µm-long grating waveguides are embedded with PN and PIN junctions, respectively. A comprehensive comparison between the two modulation arms reveals that insertion loss, bandwidth and modulation linearity are improved significantly after employing the DC Kerr effect. The complementary advantages of the slow light and the DC Kerr effect enable a modulation efficiency of 0.85 V·cm, a linearity of 115 dB·Hz2/3, and a bandwidth of 30 GHz when the group index of slow light is set to 10. Furthermore, 112 Gbit/s PAM4 transmission over 2 km standard single mode fiber (SSMF) with bit error ratio (BER) below the soft decision forward error correction (SD-FEC) threshold is also demonstrated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations –citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.