Porous nanotubes comprised of MnO2 nanosheets were fabricated with a one-pot hydrothermal method using polycarbonate membrane as the template. The diameter and thickness of nanotubes can be controlled by choice of the membrane pore size and the chemistry. The porous MnO2 nanotubes were used as a supercapacitor electrode. The specific capacitance in a three-electrode system was 365 F g−1 at a current density of 0.25 A g−1 with capacitance retention of 90.4% after 3000 cycles. An asymmetric supercapacitor with porous MnO2 nanotubes as the positive electrode and activated graphene as the negative electrode yielded an energy density of 22.5 Wh kg−1 and a maximum power density of 146.2 kW kg−1; these values exceeded those reported for other MnO2 nanostructures. The supercapacitor performance was correlated with the hierarchical structure of the porous MnO2 nanotubes.

MIL-101(Cr) has drawn much attention due to its high stability compared with other metal-organic frameworks. In this study, three trace flue gas contaminants (H2O, NO, SO2) were each added to a 10 vol% CO2/N2 feed flow and found to have a minimal impact on the adsorption capacity of CO2. In dynamic CO2 regeneration experiments, complete regeneration occurred in 10 min at 328 K for temperature swing adsorption-N2-stripping under a 50 cm3/min N2 flow and at 348 K for vacuum-temperature swing adsorption at 20 KPa. Almost 99% of the pre-regeneration adsorption capacity was preserved after 5 cycles of adsorption/desorption under a gas flow of 10 vol% CO2, 100 ppm SO2, 100 ppm NO, and 10% RH, respectively. Strong resistance to flue gas contaminants, mild recovery conditions, and excellent recycling efficiency make MIL-101(Cr) an attractive adsorbent support for CO2 capture.

No abstract

The interactions of the silane coupling agent methacryloxypropyltrimethoxysilane (MPS) with both fumed silica and a polymethylmethacrylate (PMMA) resin matrix were investigated using thermogravimetric analysis and Fourier transform infrared spectroscopy. OX 50 fumed silica was silanated with MPS at concentrations of 1% and 5% in aqueous ethanol (95%), acetone, and anhydrous toluene. Methyl methacrylate was polymerized with the silanated fumed silica (5% wt/wt) to form composites. The amount of MPS adsorption on the fumed silica and the amount of PMMA attached to the silanated fumed silica were determined by thermogravimetric analysis. MPS could be removed from the fumed silica after washing with methanol, but not after it underwent a drying process at 25 degrees C under vacuum. After vacuum drying at 25 degrees C, two types of adsorbed silane were found, i.e., firmly adsorbed and loosely adsorbed silane. The loosely adsorbed silane could desorb from silica and be incorporated into the polymer matrix through copolymerization with monomeric methyl methacrylate, resulting in crosslinking of the matrix. When the silanated silica was dried at 110 degrees C for 2 h, the loosely adsorbed silane was removed and the amount of firmly adsorbed silane increased. There was a positive correlation between the amount of firmly adsorbed MPS and the amount of PMMA attachment. The highest efficiency for PMMA attachment was found when MPS was adsorbed as a monolayer, because the loosely adsorbed silane did not contribute to the bonding of PMMA, and this suggested that not all of the double bonds of the MPS were accessible for reaction with the methacrylate monomer. Drying at 110 degrees C may also decrease the number of unsaturated double bonds of MPS.

Until recently, carbon capture and sequestration (CCS) was regarded as the most promising technology to address the alarming increase in the concentration of anthropogenic CO in the atmosphere. There is now an increasing interest in carbon capture and utilization (CCU). In this context, the capture of CO from air is an ideal solution to supply pure CO wherever it is needed. Here, we describe innovative materials for direct air capture (DAC) with unprecedented efficiency. Polyethylenimine (PEI) was supported on PME, which is an extra-large-pore silica (pore-expanded MCM-41) with its internal surfaces fully covered by a uniform layer of readily accessible C chains from cetyltrimethylammonium (CTMA ) cations. The CTMA layer plays a key role in enhancing the amine efficiency toward dry or humid ultradilute CO (400 ppm CO /N ) to unprecedented levels. At the same PEI content, the amine efficiency of PEI/PME was two to four times higher than that of the corresponding calcined mesoporous silica loaded with PEI or with different combinations of C chains and PEI. Under humid conditions, the amine efficiency of 40 wt % PEI/PME reached 7.31 mmolCO2 /g , the highest ever reported for any supported PEI in the presence of 400 ppm CO . Thus, amine accessibility, which reflects both the state of PEI dispersion and the adsorption efficiency, is intimately associated with the molecular design of the adsorbent.