No abstract

Engineering ceramics such as alumina, zirconia, silicon nitride and silicon carbide can now be manufactured reliably with reproducible properties. As such, they are of increasing interest to industry, particularly for use in demanding environments, where their thermomechanical performance is of critical importance, with applications ranging from fuel cells to cutting tools. One aspect common to virtually all applications of engineering ceramics is that eventually they must be joined with another material, most usually a metal. The joining of engineering ceramics to metals is not always easy. There are two main considerations. The first consideration is the basic difference in atomic bonding: the ionic or covalent bonding of the ceramic, compared to the metallic bond. The second consideration is the mismatch in the coefficient of thermal expansion. In general, ceramics have a lower coefficient of thermal expansion than metals and, if high tensile forces are produced in the ceramic, either as a consequence of operating conditions or from the joining procedure itself, failure can occur. The plethora of joining processes available will be reviewed in this article, placing them in context from both an academic and commercial perspective. Comment will be made on research reporting advances on known technology, as well as introducing 'newer' technologies developed over the last 10 years. Finally, reviews and commentary will be made on the potential applications of the various joining processes in the commercial environment.

No abstract

In this study, porous micron‐sized fibers of polylactic acid (PLA) are fabricated via electrospinning of PLA‐dichloromethane (DCM)‐hexane systems with no post treatment involved. Several compositions from the liquid‐liquid phase separated region of the phase diagram of this ternary system are selected and their electrospinnability are investigated throughout their phase separation process before gelation. We show that under constant processing and ambient parameters, there is a phase separation shelf time for each composition wherein the viscoelasticity of the systems is optimum to produce long, uniform porous fibers. For the first time, we investigate the effect of aging time during phase separation on the morphology of the electrospun fibers using scanning electron microscopy (SEM). Based on our results, certain phase separated systems provide a range of viscosity allowing for the production of porous spherical micro beads or fibers via electrospraying and electrospinning, respectively. It is also shown that obtaining long, uniform fibers from electrospinning of highly phase separated systems, e.g., a gel, is not feasible due to the high degree of crystallinity of their polymer‐rich domains and the solid‐like yielding behavior. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44862.

No abstract