Free-beam interferometry and angle-resolved absorption spectra are used to investigate the linear electro-optic coefficients and the linear dichroism in photoaddressable bis-azo copolymer thin films. From the first- and second order parameters deduced, the chromophore orientation distribution is calculated and displayed for several poling temperatures and chromophore concentrations. The influence of dipole-dipole interaction on the overall polymer dynamics is discussed. The first order parameter, and therefore the Pockels effect, peaks for a poling temperature of around 10 degrees C above the glass transition. The decrease of the Pockels effect above this temperature region is triggered by a head-to-tail chromophore orientation, i.e., a transition to a microcrystalline phase, increasing the second order parameter. Comparison of the experimentally observed absorption spectra and those obtained by density-functional calculations support the picture of differently aligned bis-azo dye molecules in a trans,trans configuration. Complementary wide-angle x-ray scattering is recorded to confirm the various kinds of ordering in samples poled at different temperatures.

No abstract

Videotape with a sinusoidal magnetization of 31 m wavelength is used to reflect Cs atoms with unit reflectivity in a 75 m/s atomic beam. The atoms serve as a probe, allowing us to measure the magnetic field at the surface. A technique is presented for mounting the videotape so that its surface can be curved to a specific shape or made flexible. We show that such a reflector provides high-quality grazing-incidence atom optics and we demonstrate deflections as large as 23°in a whispering-gallery geometry.

Electrically poled photoaddressable polymers, originally designed for optical data storage, are investigated in an interferometric setup. After optimization of the corona poling conditions, we obtain Pockels coefficients r33 of 44 pm/V at 1555 nm. Even at nonoptimum temperatures, the material can be electrically poled quite efficiently using light to trigger trans–cis isomerization cycles. At room temperature, the degree of poling is stable over months. At elevated temperatures, after a fast initial decay, again stable or very slowly decaying electro-optic coefficients are observed.

We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficiency of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 microm is demonstrated. By comparing distance tuning of the cavity with wavelength tuning, an effective electro-optic coefficient of -7 pm/V is measured.