High-availability seamless redundancy (HSR) is a redundancy protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy will pass through separate physical paths, pursuing zero fault recovery time. This means that even in the case of a node or a link failure, there is no stoppage of network operations whatsoever. HSR is a potential candidate for the communications of a smart grid, but its main drawback is the unnecessary traffic created due to the duplicated copies of each sent frame, which are generated and circulated inside the network. This downside will degrade network performance and might cause network congestion or even stoppage. In this paper, we present two approaches to solve the above-mentioned problem. The first approach is called quick removing (QR), and is suited to ring or connected ring topologies. The idea is to remove the duplicated frame copies from the network when all the nodes have received one copy of the sent frame and begin to receive the second copy. Therefore, the forwarding of those frame copies until they reach the source node, as occurs in standard HSR, is not needed in QR. Our example shows a traffic reduction of 37.5% compared to the standard HSR protocol. The second approach is called the virtual ring (VRing), which divides any closed-loop HSR network into several VRings. Each VRing will circulate the traffic of a corresponding group of nodes within it. Therefore, the traffic in that group will not affect any of the other network links or nodes, which results in an enhancement of traffic performance. For our sample network, the VRing approach shows a network traffic reduction in the range of 67.7 to 48.4% in a healthy network case and 89.7 to 44.8% in a faulty network case, compared to standard HSR.

The high-availability seamless redundancy (HSR) protocol, a potential candidate for substation automation system (SAS) networks, provides duplicated frame copies of each sent frame, with zero fault-recovery time. This means that even in the case of node or link failure, the destination node will receive at least one copy of the sent frame. Consequently, there is no network operation down time. However, the forwarding process of the QuadBox node in HSR is not smart and relies solely on duplication and random forwarding of all received frames. Thus, if a unicast frame is sent in any closed-loop network, the frame copies will be spread through most of all the links in both directions until they reach the destination node, which inevitably results in significant, unnecessary network traffic. In this paper, we present an algorithm called the dual virtual paths (DVP) algorithm to solve such an HSR excessive traffic issue. The idea behind our DVP algorithm is to establish automatic DVP between each HSR node and all the other nodes in the network, except for the QuadBox node. These virtual paths will be used for DVP unicast traffic transmission, rather than using the standard HSR transmission process. Therefore, the DVP algorithm results in less traffic, because there is no duplication or random forwarding, contrary to standard HSR. For the sample networks selected in this paper, the DVP algorithm shows more than a 70% reduction in network traffic and about an 80% reduction in the discarded traffic compared to the standard HSR protocol.Energies 2014, 7 1793

No abstract

This paper investigates several existing techniques for reducing high-availability seamless redundancy (HSR) unicast traffic in HSR networks for substation automation systems (SAS). HSR is a redundancy protocol for Ethernet networks that provides duplicate frames for separate physical paths with zero recovery time. This feature of HSR makes it very suited for real-time and mission-critical applications such as SAS systems. HSR is one of the redundancy protocols selected for SAS systems. However, the standard HSR protocol generates too much unnecessary redundant unicast traffic in connected-ring networks. This drawback degrades network performance and may cause congestion and delay. Several techniques have been proposed to reduce the redundant unicast traffic, resulting in the improvement of network performance in HSR networks. These HSR traffic reduction techniques are broadly classified into two categories based on their traffic reduction manner, including traffic filtering-based techniques and predefined path-based techniques. In this paper, we provide an overview and comparison of these HSR traffic reduction techniques found in the literature. The concepts, operational principles, network performance, advantages, and disadvantages of these techniques are investigated, summarized. We also provide a comparison of the traffic performance of these HSR traffic reduction techniques.

No abstract