On the basis of their inherent favourable aerodynamic properties coupled with past progress, 50 per cent reaction stages already achieve a high efficiency level. Developments aimed at further performance enhancement entail employment of advanced design features that require a deep understanding of the flow phenomena involved and their interactions. In addition, substantial on-going efforts are needed to improve the quality of the design tools. This paper focuses on the key design issues, including advanced quasi-three-dimensional and three-dimensional design aspects. It further describes developments by the authors' company during the last decade for the design of modern reaction blading and establishment of state-of-the-art design tools.

No abstract

In steam turbine power plants, the appropriate design of the last stage blades is critical in determining the plant efficiency and reliability and competitiveness. A high level of technical expertise combined with many years of operating experience are required for the improvement of last stage designs that increases performance, without sacrificing mechanical reliability. This paper focuses on three main development areas that are key for the development of last stage blades, namely the aerodynamic design, the mechanical design and the validation process. The three different lengths of last stage blade (LSB) were developed of 41in, 45in and 49in (and a number of scaled variants). The aerodynamic design process involves 3D CFD and flow path analysis, considerations such as last stage blade flutter and water droplet erosion, and last stage guide design. The mechanical design includes finite element stress and dynamic analysis, appropriate selection of the blade material, the coupling of the LSB with the rotor and the design of the LSB snubber and shroud. Experimental measurements form a key part of the product validation, from both the mechanical reliability and performance points of view.

During extreme low volume flow conditions, the last stages of a low pressure steam turbine operate in ventilation conditions that can cause a significant temperature increase of critical regions of the last stage moving blade. Under some conditions, the blade temperature may rise above a safe operating temperature, requiring the machine to be shut down. Limiting the heating effect on the last stage moving blade increases the allowable operating range of the low pressure turbine. One common method is to spray water droplets into the low pressure exhaust. As the length of last stage moving blades continues to increase, this method reaches its limit of practical operating effectiveness due to the amount of water required and its impact on the erosion of the LSB. An investigation into complimentary solutions to limit the temperature increase was conducted using CFD. An appropriate CFD setup was chosen from a sensitivity study on the effect of geometry, mesh density, turbulence model and time dependency. The CFD results were verified against steam turbine data from a test facility. The proposed complimentary solutions to limit the temperature increase include low temperature steam extraction, targeted for critical regions of the moving blade. From the test turbine and CFD results, the drivers of the temperature increase during ventilation conditions are identified and described.

Optimization of blade stacking in the last stage of low-pressure (LP) steam turbines constitutes one of the most delicate and time-consuming parts of the design process. This is the first of two papers focusing on the stacking strategies applied to the last stage guide vane (G0). Following a comprehensive review of the main features that characterize the LP last stage aerodynamics, the three-dimensional (3D) computational fluid dynamics (CFD) code used for the investigation and options related to the modeling of wet steam are described. Aerodynamic problems related to the LP last stage and the principles of 3D stacking are reviewed in detail. In this first paper, the results of a systematic study on an isolated LP stator row are used to elucidate the effects of stacking schemes, such as lean, twist, sweep, and hub profiling. These results show that stator twist not only has the most powerful influence on the reaction variation but it also produces undesirable spanwise variations in angular momentum at stator exit. These may be compensated by introducing a positive stagnation pressure gradient at entry to the last stage.