As an anode material for sodium-ion batteries (SIBs), hard carbon (HC) presents high specific capacity and favorable cycling performance. However, high cost and low initial Coulombic efficiency (ICE) of HC seriously limit its future commercialization for SIBs. A typical biowaste, mangosteen shell was selected as a precursor to prepare low-cost and high-performance HC via a facile one-step carbonization method, and the influence of different heat treatments on the morphologies, microstructures, and electrochemical performances was investigated systematically. The microstructure evolution studied using X-ray diffraction, Raman, Brunauer–Emmett–Teller, and high-resolution transmission electron microscopy, along with electrochemical measurements, reveals the optimal carbonization condition of the mangosteen shell: HC carbonized at 1500 °C for 2 h delivers the highest reversible capacity of ∼330 mA h g –1 at a current density of 20 mA g –1 , a capacity retention of ∼98% after 100 cycles, and an ICE of ∼83%. Additionally, the sodium-ion storage behavior of HC is deeply analyzed using galvanostatic intermittent titration and cyclic voltammetry technologies.

No abstract

Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs) due to its suitable potential and high reversible capacity. At the same time, the correlation between carbon local structure and sodium-ion storage behavior is not clearly understood. In this paper, the two series of HC materials with perfect spherical morphology and tailored microstructures were designed and successfully produced using resorcinol formaldehyde (RF) resin as precursor. Via hydrothermal self-assembly and controlled pyrolysis, RF is a flexible precursor for high-purity carbon with a wide range of local-structure variation. Using these processes, one series of five representative RF-based HC nanospheres with varying degrees of graphitization were obtained from an RF precursor at different carbonization temperatures. The other series of HC materials with various microscopic carbon layer lengths and shapes was achieved by carbonizing five RF precursors with different cross-linking degrees at a single carbonization condition (1300 °C and 2 h). On the basis of the microstructures, unique electrochemical characteristics, and atomic pair distribution function (PDF) analyses, we proposed a new model of “three-phase” structural for HC materials and found triregion Na-ion storage behavior: chemi-/physisorption, intercalation between carbon layers, and pore-filling, derived from the HC phases, respectively. These results enable new understanding and insight into the sodium storage mechanism in HC materials and improve the potential for carbon-based SIB anodes.

No abstract

Unique nanostructures always lead to extraordinary electrochemical energy storage performance. Here, the authors report a new strategy for using Metal‐organic frameworks (MOFs) derived cobalt sulfide in a carbon matrix with a 3D honeycombed porous structure, resulting in a high‐performance supercapacitor with unrivalled capacity of ≈1887 F g‐1 at the current density of 1 A g‐1. The honeycomb‐like structure of Co9S8@C composite is loosely adsorbed, with plentiful surface area and high conductivity, leading to improved Faradaic processes across the interface and enhanced redox reactions at active Co9S8 sites. Therefore, the heterostructure‐fabricated hybrid supercapacitor, using activated carbon as the counter electrode, demonstrates a high energy density of 58 Wh kg‐1 at the power density of 1000 W kg‐1. Even under an ultrahigh power density of 17 200 W kg‐1, its energy density maintains ≈38 Wh kg‐1. The hybrid supercapacitor also exhibits suitable cycling stability, with ≈90% capacity retention after 10 000 continuous cycles at the current density of 5 A g‐1. This work presents a practical method for using MOFs as sacrificial templates to synthesize metal‐sulfides for highly efficient electrochemical energy storage.