No abstract

This paper presents a methodology to maximize the self-sufficiency or cost-effectiveness of grid-connected prosumers by optimizing the sizes of photovoltaic (PV) systems and electrochemical batteries. In the optimal sizing procedure, a limitation on the maximum injection in the grid can affect the energy flows, the economic effectiveness of the investments, and thus the sizing results. After the explanation of the procedure, a case study is presented, and a parametric analysis of the effect of possible injection limits is shown. The procedure is applied to size plants for an Italian domestic prosumer, whose electric load profile was measured for a year. A software program developed using the proposed methodology is also briefly presented. It is used for both research and educational purposes, both in laboratory classes and in remote lessons.

No abstract

Conventional methods of cooling are not an ideal way to overcome the heat problem in power electronics today. A simple solution would be using micro heat spreader as an integrated part in the silicon substrate. This investigation presents a detailed analysis on maximum heat transfer capabilities of silicon-water cooling devices, flat plate micro heat spreaders. The predictive hydraulic and thermal models were developed to define the heat spreader thermal performances and capillary limitations. Theoretical results of the maximal heat flux that could be transferred agreed reasonably well with the experimental data and the developed model provides a better understanding of the heat transfer capability of micro heat spreaders.

No abstract