Ultrasound and photoacoustics can be utilized as complementary imaging techniques to improve clinical diagnoses. Photoacoustics provides optical contrast and functional information while ultrasound provides structural and anatomical information. As of yet, photoacoustic imaging uses large and expensive systems, which limits their clinical application and makes the combination costly and impracticable. In this work we present and evaluate a compact and ergonomically designed handheld probe, connected to a portable ultrasound system for inexpensive, real-time dualmodality ultrasound/photoacoustic imaging. The probe integrates an ultrasound transducer array and a highly efficient diode stack laser emitting 130 ns pulses at 805 nm wavelength and a pulse energy of 0.56 mJ, with a high pulse repetition frequency of up to 10 kHz. The diodes are driven by a customized laser driver, which can be triggered externally with a high temporal stability necessary to synchronize the ultrasound detection and laser pulsing. The emitted beam is collimated with cylindrical micro-lenses and shaped using a diffractive optical element, delivering a homogenized rectangular light intensity distribution. The system performance was tested in vitro and in vivo by imaging a human finger joint.

We present a modal analysis of metal-insulator-metal (MIM)-based metamaterials in the far infrared region. These structures can be used as resonant reflection bandcut spectral filters that are independent of the polarization and direction of incidence. We show that this resonant reflection dip is due to the excitation of quasimodes (modes associated with a complex frequency) leading to quasi-total absorption. We have fabricated large area samples made of chromium nanorod gratings on top of Si/Cr layers deposited on silicon substrate. Measurements by Fourier transform spectrophotometry show good agreement with finite element simulations. A quasimodal expansion method is applied to obtain a minimal resonant model that fits well full wave simulations and that highlights excitation conditions of the modes.

We present a simplified method to employ laser interference lithography for the fabrication of ordered nanostructures. Neither resist, nor an elaborate fabrication process was needed. Four-beam interference patterns generated in this work included periodic arrays of holes in GaAs, covered with SiO(2) bubbles, and they were directly written into the sample. The diameters of the smallest holes were less than 30 nm. We propose a model to interpret the results.

No abstract

No abstract