No abstract

No abstract

As processing and network speeds are accelerated to support data-rich services, the bandwidth of backplane interconnects needs to be increased while maintaining the channel length and multi-rate links. However, channel losses and impedance discontinuities increase at high data-rates, making it difficult to compensate the channel. In this work, we target serial links from autonegotiation in 100G-KR4 of 0.3Gb/s to 32GFC of 28.05Gb/s in 40dB backplane architecture [1][2][3]. To achieve this challenge, there are two key techniques. First, we introduce a 36-tap decision-feedback equalizer (DFE) to cancel reflections due to connectors because these reflections close the eye. To operate the 36-tap DFE, we need to fix a CDR lock-point and calculate 36-tap coefficients accurately. Thus, we develop a pattern-captured CDR with a 4b pattern filter to fix the lock-point, and a 3b pattern-matched adaptive equalizer (AEQ) to optimize 36 tap coefficients. These techniques enable our chip to compensate 40dB channel loss. Second, we target 100G-KR4/40G-KR4/10G-KR/25G-KR and 32GFC/16GFC/8GFC/4GFC. To operate across a wide range of data-rates, from 0.3 to 28.05Gb/s, with low jitter, we develop a PLL architecture with two LC-VCOs and one ring VCO with a data-rate-adjustment technique by controlling an LDO. Our test chip is fabricated in 28nm CMOS. Our signal conditioner is the demonstration to achieve the BER <10 -12 PRBS31 at 100G-KR4 in a 40dB chip-to-chip backplane with two connectors by using the 36-tap DFE to cancel the reflection and to operate across a wide range of data-rates from 0.3 to 28.05Gb/s.

No abstract

No abstract