In general, the polysulfone (PSf ) membranes are popular choices for water treatment because they have high thermal stability and good chemical resistance. On the other hand, the filtration capacity of the polysulfone membrane is limited because of its low water flux and poor antifouling ability, which are caused by the low surface hydrophilicity of the membranes. In this research, blending of graphene oxide (GO) or graphene oxide-titanium dioxide (GO-TiO 2 ) mixture into the polysulfone matrix had been carried out through the phase inversion method to enhance the hydrophilic and antifouling properties. Methods such as energydispersive X-ray spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and water contact angle measurement were used to examine the surface properties of the prepared membranes. Experimental results have led to a conclusion that graphene oxide can be stabilized into prepared membranes, and then, by reducing the water contact angle values, the surface of these membranes becomes hydrophilic, which increases the permeability and the water flux of methylene blue from the aqueous feed solution, improving the membrane's antifouling resistance.

No abstract

In this work, the polyamide (PA) membrane surface has been modified by coating of nanomaterials including graphene oxide (GO) and titanium dioxide (TiO2) to enhance membrane separation and antifouling properties. The influence of surface modification conditions on membrane characteristics has been investigated and compared with a base membrane. Membrane surface properties were determined through scanning electron microscope (SEM) images and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy. Membrane separation performance was determined through the possibility for the removal of methylene blue (MB) in water. Membrane antifouling property was evaluated by the maintained flux ratios (%) after 120 minutes of filtration. The experimental results showed that the appearance of hydrophilic groups after coating of GO and TiO2 nanocomposite materials with or without UV irradiation onto membrane surface made an improvement in the separation property of the coated membranes. The membrane flux increased from 28% to 61%; meanwhile, the antifouling property of the coated membranes was improved clearly, especially for UV-irradiated PA/GO-TiO2 membrane.

The laterite-coating manganese dioxide nanoparticle material (M2) prepared by the immersion method was used for the efficient removal of methylene blue (MB) from aqueous solution. The adsorption and heterogeneous Fenton catalytic oxidation experiments of M2 were investigated by changing the effective factors such as time, pH, amount of M2, and concentration of MB. The adsorption data of M2 showed good fitting with the Langmuir isotherm, suggesting that the adsorption of MB on the surface of M2 is a heterogeneous and physical adsorption process. Degradation of MB was also carried out to evaluate the heterogeneous Fenton catalytic oxidation characterization of a new catalytic oxidation material (M2). The results show that the M2 material has both adsorption and heterogeneous Fenton catalytic oxidation. However, the heterogeneous Fenton catalytic oxidation of the M2 material is the main performance. Hence, our groups have investigated the ability of the catalytic column treatment with high efficiency of 98–100% and the degradation efficiency after the sample running through the column almost does not change much. This proves that heterogeneous Fenton catalytic activity of the catalytic column is completely unaffected and reused many times after oxidizing MB. Specifically, even if the M2 material is reused for five times, the degradation efficiency still reaches 98.86%.

Heavy metals in the wastewater