Aligned growth of transition metal dichalcogenides and related two-dimensional (2D) materials is essential for the synthesis of high-quality 2D films due to effective stitching of merging grains. Here, we demonstrate the controlled growth of highly aligned molybdenum disulfide (MoS) on c-plane sapphire with two distinct orientations, which are highly controlled by tuning sulfur concentration. We found that the size of the aligned MoS grains is smaller and their photoluminescence is weaker as compared with those of the randomly oriented grains, signifying enhanced MoS-substrate interaction in the aligned grains. This interaction induces strain in the aligned MoS, which can be recognized from their high susceptibility to air oxidation. The surface-mediated MoS growth on sapphire was further developed to the rational synthesis of an in-plane MoS-graphene heterostructure connected with the predefined orientation. The in-plane epitaxy was observed by low-energy electron microscopy. Transmission electron microscopy and scanning transmission electron microscopy suggest the alignment of a zigzag edge of MoS parallel to a zigzag edge of the neighboring graphene. Moreover, better electrical contact to MoS was obtained by the monolayer graphene compared with a conventional metal electrode. Our findings deepen the understanding of the chemical vapor deposition growth of 2D materials and also contribute to the tailored synthesis as well as applications of advanced 2D heterostructures.

The interest in two-dimensional and layered materials continues to expand, driven by the compelling properties of individual atomic layers that can be stacked and/or twisted into synthetic heterostructures. The plethora of electronic properties as well as the emergence of many different quasiparticles, including plasmons, polaritons, trions and excitons with large, tunable binding energies that all can be controlled and modulated through electrical means has given rise to many device applications. In addition, these materials exhibit both room-temperature spin and valley polarization, magnetism, superconductivity, piezoelectricity that are intricately dependent on the composition, crystal structure, stacking, twist angle, layer number and phases of these materials. Initial results on graphene exfoliated from single bulk crystals motivated the development of wide-area, high purity synthesis and heterojunctions with atomically clean interfaces. Now by opening this design space to new synthetic two-dimensional materials "beyond graphene", it is possible to explore uncharted opportunities in designing novel heterostructures for electrical tunable devices. To fully reveal the emerging functionalities and opportunities of these atomically thin materials in practical applications, this review highlights several representative and noteworthy research directions in the use of electrical means to tune these aforementioned physical and structural properties, with an emphasis on discussing major applications of beyond graphene 2D materials in tunable devices in the past few years and an outlook of what is to come in the next decade.

The ability of a material to conduct heat influences many physical phenomena, ranging from thermal management in nanoscale devices to thermoelectrics. Van der Waals 2D materials offer a versatile platform to tailor heat transfer due to their high surface‐to‐volume ratio and mechanical flexibility. Here, the nanoscale thermal properties of 2D indium selenide (InSe) are studied by scanning thermal microscopy. The high electrical conductivity, broad‐band optical absorption, and mechanical flexibility of 2D InSe are accompanied by an anomalous low thermal conductivity (κ). This can be smaller than that of low‐κ dielectrics, such as silicon oxide, and it decreases with reducing the lateral size and/or thickness of InSe. The thermal response is probed in free‐standing InSe layers as well as layers supported by a substrate, revealing the role of interfacial thermal resistance, phonon scattering, and strain. These thermal properties are critical for future emerging technologies, such as field‐effect transistors that require efficient heat dissipation or thermoelectric energy conversion with low‐κ, high electron mobility 2D materials, such as InSe.

We use confocal Raman microscopy and modified vector analysis methods to investigate the nanoscale origin of strain and carrier concentration in exfoliated graphene-hexagonal boron nitride (hBN) heterostructures on silicon dioxide (SiO2). Two types of heterostructures are studied: graphene on SiO2 partially coved by hBN, and graphene fully encapsulated between two hBN flakes. We extend the vector analysis methods to produce spatial maps of the strain and doping variation across the heterostructures. This allows us to visualise and directly quantify the much-speculated effect of the environment on carrier concentration as well as strain in graphene. Moreover, we demonstrate that variations in strain and carrier concentration in graphene arise from nanoscale features of the heterostructures such as fractures, folds and bubbles trapped between layers. For bubbles in hBN-encapsulated graphene, hydrostatic strain is shown to be greatest at bubble centres, whereas the maximum of carrier concentration is localised at bubble edges. Raman spectroscopy is shown to be a non-invasive tool for probing strain and doping in graphene, which could prove useful for engineering of two-dimensional devices.

Graphene has shown great potential for modulating infrared (IR) light in devices as small as 350 nm. At these length scales, nanoscale features of devices, and their interaction with light, can be expected to play a significant role in device performance. Bubbles in van der Waals heterostructures are one such feature, which have recently attracted considerable attention thanks to their ability to modify the optoelectronic properties of 2D materials through strain. Here we use scattering-type scanning near-field optical microscopy (sSNOM) to measure the nanoscale IR response from a network of variously shaped bubbles in hexagonal boron nitride (hBN)-encapsulated graphene. We show that within individual bubbles there are distinct domains with strongly enhanced IR absorption. We correlate this with strain in the graphene, found with confocal Raman microscopy and vector decomposition analysis. This reveals intricate and varied strain configurations, in which bubbles of different shape induce more bi-or uniaxial strain configurations. Ridges in the bubbles, seen by atomic force microscopy (AFM), coincide with the domain boundaries, which leads us to attribute the domains to nanoscale strain differences in the graphene. This reveals pathways towards future strain-based graphene IR devices.