Graphene-based mixed-dimensional materials hybridization is important for a myriad of applications. However, conventional manufacturing techniques face critical challenges in producing arbitrary geometries with programmable features, continuous interior networks, and multimaterials homogeneity. Here we propose a generalized three-dimensional (3D) printing methodology for graphene aerogels and graphene-based mixed-dimensional (2D + nD, where n is 0, 1, or 2) hybrid aerogels with complex architectures, by the development of hybrid inks and printing schemes to enable mix-dimensional hybrids printability, overcoming the limitations of multicomponents inhomogeneity and harsh post-treatments for additives removal. Importantly, nonplanar designed geometries are also demonstrated by shape-conformable printing on curved surfaces. We further demonstrate the 3D-printed hybrid aerogels as ultrathick electrodes in a symmetric compression tolerant microsupercapacitor, exhibiting quasi-proportionally enhanced areal capacitances at high levels of mass loading. The excellent performance is attributed to the sufficient ion- and electron-transport paths provided by the 3D-printed highly interconnected networks. The encouraging finding indicates tremendous potentials for practical energy storage applications. As a proof of concept, this general strategy provides avenues for various next-generation complex-shaped hybrid architectures from microscale to macroscale, for example, seawater desalination devices, electromagnetic shielding systems, and so forth.

No abstract

Passive radiative cooling technology can cool down an object by reflecting solar light and radiating heat simultaneously. However, photonic radiators generally require stringent and nanoscale-precision fabrication, which greatly restricts mass production and renders them less attractive for large-area applications. A simple, inexpensive, and scalable electrospinning method is demonstrated for fabricating a high-performance flexible hybrid membrane radiator (FHMR) that consists of polyvinylidene fluoride/ tetraethyl orthosilicate fibers with numerous nanopores inside and SiO 2 microspheres randomly distributed across its surface. Even without silver back-coating, a 300 µm thick FHMR has an average infrared emissivity >0.96 and reflects ≈97% of solar irradiance. Moreover, it exhibits great flexibility and superior strength. The daytime cooling performance this device is experimentally demonstrated with an average radiative cooling power of 61 W m −2 and a temperature decrease up to 6 °C under a peak solar intensity of 1000 W m −2 . This performance is comparable to those of state-of-the-art devices.

We studied a novel photoanode structure inspired by butterfly wing scales with potential application on dye-sensitized solar cell in this paper. Quasi-honeycomb like structure (QHS), shallow concavities structure (SCS), and cross-ribbing structure (CRS) were synthesized onto a fluorine-doped tin-oxide-coated glass substrate using butterfly wings as biotemplates separately. Morphologies of the photoanodes, which were maintained from the original butterfly wings, were characterized by scanning and transmission electron microscopies. The results show that the calcined photoanodes with butterfly wings' structures, which comprised arranged ridges and ribs consisting of nanoparticles, were fully crystallined. Analysis of absorption spectra measurements under visible light wavelength indicates that the light-harvesting efficiencies of the QHS photoanode were higher than the normal titania photoanode without biotemplates because of the special microstructures, and then the whole solar cell efficiency can be lifted based on this.