No abstract

No abstract

Photovoltaic solar energy is an abundant, renewable, and clean source of energy that can contribute to the energy transition. However, traditional land-based solar installation have limitations in terms of space, efficiency, and environmental impact. Floating solar panels have emerged as a promising technology that can overcome these limitations and provide a range of benefits. This work describes the design and experimental testing of a small-scale of floating photovoltaic module prototype, with a focus on the effect of solar irradiation on its maximum power output. The prototype is composed of a 4Wp photovoltaic module and a buoyant supporting structure. Using Matlab®, simulations were performed on the floating photovoltaic module under varying environmental conditions, including solar irradiance, temperature, and wind speed. The prototype demonstrated an electrical performance of 3.62W under solar irradiation of 895W/m2 and a temperature of 41°C, with a power ratio exceeding 97% of this maximum power under standard conditions. The prototype also showed a positive energy gain when compared to the same photovoltaic module in a horizontal or inclined position, particularly at high temperature and solar irradiance. Moreover, shows a stability and resistance in harsh weather conditions. The mathematical fitting with a Gaussian distribution shows the rapid increase of the maximum power of the floating photovoltaic module in the range of 37°C to 42°C of temperature with increasing solar irradiance.

Currently several technologies are being developed to produce electricity from renewable sources, and the degrees of maturity, performance and lifetime are very different from one technology to another. This work presents a study by a simulation and analysis for clarity the effect of aging of a photovoltaic module associated with an energy production system of renewable origin installed in a desert environment. The PV array has a nominal power of 9,2KWp, and the photovoltaic module used in this study is heterojunction with intrinsic thin layer technology of 230WP. During this work, we obtained the system production is 17131 KWh/year, the producible is 1862 KWh/KWp/year, and the normalized production is 5,10 KWh/KWp/day, with the losses of the system is 0,16KWh/KWp/day. The performance ratio of our simulated system is about 0,822, and the collection loss of the photovoltaic field is LC = 0,94KWh/KWP/day, with loss system is LS = 0,16 KWh/KWP/day, and the aging rate of photovoltaic module estimated by simulation around the 14% for 25 years of electrical production in a desert environment.