Bioinspired soft ionic actuators, which exhibit large strain and high durability under low input voltages, are regarded as prospective candidates for future soft electronics. However, due to the intrinsic drawback of weak blocking force, the feasible applications of soft ionic actuators are limited until now. An electroactive artificial muscle electro-chemomechanically reinforced with 3D graphene-carbon nanotube-nickel heteronanostructures (G-CNT-Ni) to improve blocking force and bending deformation of the ionic actuators is demonstrated. The G-CNT-Ni heteronanostructure, which provides an electrically conductive 3D network and sufficient contact area with mobile ions in the polymer electrolyte, is embedded as a nanofiller in both ionic polymer and conductive electrodes of the ionic actuators. An ionic exchangeable composite membrane consisting of Nafion, G-CNT-Ni and ionic liquid (IL) shows improved tensile modulus and strength of up to 166% and 98%, respectively, and increased ionic conductivity of 0.254 S m . The ionic actuator exhibits enhanced actuation performances including three times larger bending deformation, 2.37 times higher blocking force, and 4 h durability. The electroactive artificial muscle electro-chemomechanically reinforced with 3D G-CNT-Ni heteronanostructures offers improvements over current soft ionic actuator technologies and can advance the practical engineering applications.

Development of biomimetic actuators has been an essential motivation in the study of smart materials. However, few materials are capable of controlling complex twisting and bending deformations simultaneously or separately using a dynamic control system. Here, we report an ionic polymer-metal composite actuator having multiple-shape memory effect, and is able to perform complex motion by two external inputs, electrical and thermal. Prior to the development of this type of actuator, this capability only could be realized with existing actuator technologies by using multiple actuators or another robotic system. This paper introduces a soft multiple-shape-memory polymer-metal composite (MSMPMC) actuator having multiple degrees-of-freedom that demonstrates high maneuverability when controlled by two external inputs, electrical and thermal. These multiple inputs allow for complex motions that are routine in nature, but that would be otherwise difficult to obtain with a single actuator. To the best of the authors’ knowledge, this MSMPMC actuator is the first solitary actuator capable of multiple-input control and the resulting deformability and maneuverability.

A novel, hand-held Reference Point Indentation (RPI) instrument, measures how well the bone of living patients and large animals resists indentation. The results presented here are reported in terms of Bone Material Strength, which is a normalized measure of how well the bone resists indentation, and is inversely related to the indentation distance into the bone. We present examples of the instrument's use in: (1) laboratory experiments on bone, including experiments through a layer of soft tissue, (2) three human clinical trials, two ongoing in Barcelona and at the Mayo Clinic, and one completed in Portland, OR, and (3) two ongoing horse clinical trials, one at Purdue University and another at Alamo Pintado Stables in California. The instrument is capable of measuring consistent values when testing through soft tissue such as skin and periosteum, and does so handheld, an improvement over previous Reference Point Indentation instruments. Measurements conducted on horses showed reproducible results when testing the horse through tissue or on bare bone. In the human clinical trials, reasonable and consistent values were obtained, suggesting the Osteoprobe V R is capable of measuring Bone Material Strength in vivo, but larger studies are needed to determine the efficacy of the instrument's use in medical diagnosis.

Ionic polymer-metal composite artificial muscles have received great research attention in the development of robotic manipulators, advanced medical devices, and underwater propulsors, such as artificial fish fins. This is due to their unique properties of large deformation, fast dynamic response, low-power requirements, and the ability to operate in aquatic environments. Recently, locomotion of biological cells and microorganisms through unique motion of cilium (flagellum) has received great interest in the field of biomimetic robotics. It is envisioned that artificial cilia can be an effective strategy for maneuvering and sensing in small-scale bioinspired robotic systems. However, current actuators used for driving the robots are typically rigid, bulky in mechanism and electronics requirements producing some acoustic signatures, and difficult to miniaturize. Herein, we report biomimetic, wirelessly driven, electroactive polymer (EAP) microfibers that actuate in an aqueous medium when subjected to an external electric field of <5 V/mm, which can be realized to create cilia-based robotic systems for aquatic applications. Initial development and manufacturing of these systems is presented in this paper. The EAP fibers are fabricated from ionic polymer precursor resin through melt-drawing process and have a circular cross-section with a diameter of 30‐70 μm. When properly activated and subjected to an electric field with switching polarity, the EAP fibers exhibit cyclic actuation with adequate response time (0.05‐5 Hz). The experimental results are presented and discussed to demonstrate the performance and feasibility of biomimetic cilia-based microactuators. Prospective bioinspired applications of the artificial muscle cilia-based system in marine operations are also discussed.

The ionic polymer-metal composite (IPMC) is an emerging smart material in actuation and sensing applications, such as artificial muscles, underwater actuators, and advanced medical devices. However, the effect of the change in surface electrode properties on the actuating of IPMC has not been well studied. To address this problem, we theoretically predict and experimentally investigate the dynamic electro-mechanical response of the IPMC thin-strip actuator. A model of the IPMC actuator is proposed based on the Poisson-Nernst-Planck equations for ion transport and charge dynamics in the polymer membrane, while a physical model for the change of surface resistance of the electrodes of the IPMC due to deformation is also incorporated. By incorporating these two models, a complete, dynamic, physics-based model for IPMC actuators is presented. To verify the model, IPMC samples were prepared and experiments were conducted. The results show that the theoretical model can accurately predict the actuating performance of IPMC actuators over a range of dynamic conditions. Additionally, the charge dynamics inside the polymer during the oscillation of the IPMC is presented. It is also shown that the charge at the boundary mainly affects the induced stress of the IPMC. The current study is beneficial for the comprehensive understanding of the surface electrode effect on the performance of IPMC actuators.