Electric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena. Nevertheless, magneto-ionics typically requires heat treatments and multicomponent heterostructures. Here we report on the electrolytegated and defect-mediated O and Co transport in a Co 3 O 4 single layer which allows for room-temperature voltage-controlled ON−OFF ferromagnetism (magnetic switch) via internal reduction/oxidation processes. Negative voltages partially reduce Co 3 O 4 to Co (ferromagnetism: ON), resulting in graded films including Co-and O-rich areas. Positive bias oxidizes Co back to Co 3 O 4 (paramagnetism: OFF). This electric-field-induced atomic-scale reconfiguration process is compositionally, structurally, and magnetically reversible and self-sustained, since no oxygen source other than the Co 3 O 4 itself is required. This process could lead to electric-field-controlled device concepts for spintronics.

Magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ions. Here, we demonstrate room-temperature voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a CoN film. Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4. Both materials are nanocrystalline (face-centered cubic structure) and show reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Remarkably, nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results may open new avenues in applications such as brain-inspired computing or iontronics in general.

Clarification of waste recycled cooking oil (WCO) is very important in order to refine the intermediate regenerated base resulting from the previous steps. Bentonite has been historically employed as a filling material for oil refining filters due to its easy availability and its cheap price. In the present communication our early results from the filtration of degummed WCO through a pad of bentonite are presented. In particular, the variation of density, flash point and color have been monitored prior and after the filtration process and compared with samples of non-filtered WCO. An early classification of the bentonite employed has been conducted on the basis of FT-IR and XRD measurements.

Abstract Magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ions. Here, we demonstrate room-temperature voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a CoN film. Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4. Both materials are nanocrystalline (face-centered-cubic structure) and show reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Remarkably, nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results may open new avenues in applications such as brain-inspired computing or iontronics in general.

One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe 75 Al 25 (at. %) thin film on top of a 110-oriented Pb(Mg 1/3 Nb 2/3)O 3-32PbTiO 3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe 75 Al 25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe 75 Al 25 , leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.