We demonstrate the capability of accurate time transfer using optical fibers over long distances utilizing a dark fiber and hardware which is usually employed in two-way satellite time and frequency transfer (TWSTFT). Our time transfer through optical fiber (TTTOF) system is a variant of the standard TWSTFT by employing an optical fiber in the transmission path instead of free-space transmission of signals between two ground stations through geostationary satellites. As we use a dark fiber there are practically no limitations to the bandwidth of the transmitted signals so that we can use the highest chip-rate of the binary phase-shift modulation available from the commercial equipment. This leads to an enhanced precision compared to satellite time transfer where the occupied bandwidth is limited for cost reasons. The TTTOF system has been characterized and calibrated in a common clock experiment at PTB, and the combined calibration uncertainty is estimated as 74 ps. In a second step the remote part of the system was operated at Leibniz Universität Hannover, Institut für Quantenoptik (IQ) separated by 73 km from PTB in Braunschweig. In parallel, a GPS time transfer link between Braunschweig and Hannover was established, and both links connected a passive hydrogen maser at IQ with the reference time scale UTC(PTB) maintained in PTB. The results obtained with both links agree within the 1-σ uncertainty of the GPS link results, which is estimated as 0.72 ns. The fiber link exhibits a nearly 10-fold improved stability compared to the GPS link, and assessment of its performance has been limited by the properties of the passive maser.
High power supercontinuum generation with 70 W average output power in a nonlinear ytterbium-doped fiber amplifier is demonstrated using all-normal dispersion, all-fiber master oscillator power amplifier configuration. The supercontinuum covers from 1064 nm to beyond 1700 nm with spectral flatness better than 12 dB and 67.3% optical to optical conversion efficiency. The almost uniform spectral power density across the whole continuum is more than 70 mW/nm and the nanosecond bursts output have an effective peak power of 82.7 kW.
All-fiber-integrated mid-infrared (mid-IR) supercontinuum (SC) generation in a single mode ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber with 13 W average output power and a spectrum extending from ∼1.9 to 4.3 μm is reported, which we believe is the highest output power for mid-IR SC generation in ZBLAN fibers. The overall optical conversion efficiency from the 790 nm pump light of the last stage Tm-doped fiber (TDF) amplifier to the total SC output was 20%, and the SC power for wavelengths longer than 2.5 μm was 6.85 W with a power ratio of 52.69% with respect to the total SC power. The mid-IR SC generation in ZBLAN fiber was pumped by a 2 μm master oscillator power amplifier (MOPA) system, which is also very appropriate for high power 2-2.5 μm region SC generation. We also demonstrate high efficiency SC generation in the TDF amplifier with 62.1 W average power, 39.8% optical efficiency, and a spectrum extending from 1.9 to 2.7 μm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.