Whey protein has high biological value and functional properties. Therefore, it is necessary to develop methods to recover this valuable protein and minimize the environmental impacts. Adsorptive processes using alternative adsorbents from agroindustrial waste increase the number of alternatives for adequate final disposal of the waste and add value. The aim of this study was to develop a mesoporous activated carbon (AC) from defective coffee beans (DCB) for the adsorption of fresh whey protein. The morphological structure of the adsorbent produced was characterized, and both Raman spectroscopy, FTIR and thermal analyses were performed; and the effect of pH on the adsorption capacity (q, mg g-1) was evaluated. The characterization showed that: the AC exhibited a porous size between 33 and 43 Å, corresponding to mesoporous materials; the crystallite size (La) of AC was estimated at 9.31 ± 0.14 nm; the highest adsorption capacity value (239.1781 mg g-1) was achieved at pH 2.5 and 25ºC; and the point of zero charge of the adsorbent was at pH 2.0. The pseudo first-order model fit best to the experimental results (R2 > 0.99) of whey protein adsorption onto activated carbon, and the Langmuir model was the most appropriate to represent the experimental data, with a maximum adsorption capacity of 378.4380 mg g-1, demonstrating the potential of AC obtained from DCB to adsorb fresh whey protein.