Richard (2020) H2S gas sensing performance and mechanisms using CuO-Al2O3 composite films based on both surface acoustic wave and chemiresistor techniques.

The coplanar waveguide (CPW) microwave resonators have been widely applied for solid-state quantum computation and single-photon detection. Basing on the physical analysis for the high fidelity readouts of the qubit(s), in this paper we design and then fabricate accordingly the desired aluminum (Al) film quarter-wavelength resonators on sapphire substrates. The ultra-low temperature measurement results show that the linearity of the internal quality factor under the proper driving power is satisfied well for the high fidelity readouts of the qubit(s); and the phase- and amplitude fractional frequency noises are significantly less for avoiding the potential information false alarms of the detected qubit during the readouts. With the demonstrated qubit-resonator experimental parameters, we argue that the designed and fabricated quarter-wavelength CPW resonators, with optimized parameters, can be used to implement the desired weakly perturbing readout measurements of the solid-state qubits on-chip.

No abstract

We study the optical pulse response of a superconducting half-wavelength coplanar waveguide (CPW) resonator. We apply a short optical pulse to the center strip of the CPW resonator, where the current distribution shows antinodes or nodes for different resonance modes, and measure the frequency response. We develop a time-dependent variable inductance circuit model with which we can simulate the optical pulse response of the resonator. By fitting this model to experimental data, we extract the temporal kinetic inductance variations, which directly reflect the quasi-particle recombination with time and diffusion in space. We also retrieve the spatial size of the quasi-particle distribution and the quasi-particle diffusion constant. Our study is very useful for the design of photon-counting kinetic inductance detectors, and the method developed in this work provides a useful way to study the quasi-particle dynamics in the superconductor.

We present a new fitting method that can robustly and accurately fit the complex transmission curve of a superconducting resonator in the nonlinear regime. This method takes into account the varying internal current in the resonator at different frequencies and the nonlinear dependence of the inductance on the internal current L = L0(1+I2/I* 2), where I* is a characteristic current. We demonstrate using this method to retrieve important resonator parameters, such as the quality factor and the resonance frequency, from resonators driven below, near, and above bifurcation. We further use this method to retrieve I*for lumped-element TiN resonators with various inductor designs. By fitting the resonance frequency shift at different readout powers of each resonator, we can determine the characteristic current I* which is found to be linearly related to the cross-sectional area of the narrow inductor strip. Our method has wide applications in superconducting detector, superconducting qubit and parametric amplifier data analysis where the resonator is driven in the nonlinear regime.