In current, constant speed of asynchronous generator system has been used wind farm in China areas. But because of that abilities of reactive power control helpless, reactive power have been provided by grid. In view of the above situation, the feasible measures are adopted in the wind dynamic reactive power compensation devices. The asynchronous machine transient process used reactive power to keeping voltage of machine has been provided. This article introduced the Game Theory in economics to the area of reactive power compensation. This new method of the share of reactive power in wind farm, will improve wind farm reactive power compensation too vague to efficient in the moment. In the meantime, the share of reactive power algorithm analysis process have bee bullied in this paper. For the research in the future, it proposed supplementary opinions.

No abstract

As an emerging nanotechnology, quantum-dot cellular automata (QCA) has the potential to be used for next generation VLSI. Various designs of combinational logic circuits have been proposed for QCA implementation, but sequential circuit design is limited due to the lack of high-performance QCA flip-flops. After an introduction on QCA and dual-edge triggered (DET) flip-flops, a new QCA DET T flip-flop following a pulsed latch scheme is presented. The proposed T flip-flop is simulated using QCADesigner simulator and its logic functionality is verified. The same data throughput of the DET flip-flop can be achieved while operating at half the clock frequency of a single-edge triggered (SET) counterpart. The proposed flip-flop is promising in building QCA sequential circuits with low power and high performance.

Filling grouting is effective to control the overlying strata movement and surface subsidence in mining and tunnel engineering.Grouting material is used in grouting reinforcement projects. In this experiment,based on the mechanical properties of grouting materials, Expert Design and response surface methodology (RSM) is used to optimize the mix proportion of grout materials. The sand-fly ash ratio ,water reducing agent addition are researched as variables, and the 3D response surface is established between the factors and the performance indicators. Microstructure explains the mechanism of factors affecting performance indicators.The results show the relationship between factors and performance can be well fitted by RSM.The order of significance on compressive strength and solidification ratio is sand-fly ash ratio＞water reducing agent addition and the order of significant on viscosity is water reducing agent addition＞sand-fly ash ratio.Response surface methodology accurately describes the functional relationship between the target value and the design variables.Microstructure shows hydration reaction and the secondary hydration reaction of fly ash will be carried out after cement-fly ash mixed, and the addition of fly ash is especially important for grout material properties.

No abstract