The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiCp/Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiCp/Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activated physicochemical wear due to diamond-graphite transformation catalyzed by Cu in air atmosphere and mechanically driven abrasive wear due to high-frequency scrape of hard SiC reinforcement on tool surface. An analytical diamond wear model, coupling Usui abrasive wear model and Arrhenius extended graphitization wear model was proposed and implemented through a user-defined subroutine for tool wear estimates. Tool wear estimate in diamond drilling of SiCp/Al6063 composites was achieved by incorporating the combined abrasive-chemical tool wear subroutine into the coupled thermomechanical FE model of 3D drilling. The developed drilling FE model for reproducing diamond tool wear was validated for feasibility and reliability by comparing numerically simulated tool wear morphology and experimentally observed results after drilling a hole using brazed polycrystalline diamond (PCD) and chemical vapor deposition (CVD) diamond coated tools. A fairly good agreement of experimental and simulated results in cutting forces, chip and tool wear morphologies demonstrates that the developed 3D drilling FE model, combined with a subroutine for diamond tool wear estimate can provide a more accurate analysis not only in cutting forces and chip shape but also in tool wear behavior during drilling SiCp/Al6063 composites. Once validated and calibrated, the developed diamond tool wear model in conjunction with other machining FE models can be easily extended to the investigation of tool wear evolution with various diamond tool geometries and other machining processes in cutting different workpiece materials.

No abstract

No abstract

For the implementation of simulations for large plastic deformation processes such as cutting and impact, the development of the constitutive models for describing accurately the dynamic plasticity and damage behaviors of materials plays a crucial role in the improvement of simulation accuracy. This paper focuses on the dynamic behaviors of 45CrNiMoVA ultra-high-strength torsion bar steel. According to investigation of the Split-Hopkinson pressure bar (SHPB) and Split-Hopkinson tensile bar (SHTB) tests at different strain rate and different temperatures, 45CrNiMoVA ultra-high-strength steel is characterized by strain hardening, strain-rate hardening and thermal softening effects. Based on the analysis on the mechanism of the experimental results and the limitation of classic Johnson-Cook (J-C) constitutive model, a modified J-C model by considering the phase transition at high temperature is established. The multi-objective optimization fitting method was used for fitting model parameters. Compared with the classic J-C constitutive model, the fitting accuracy of the modified J-C model significantly improved. In addition, finite element simulations for SHPB and SHTB based on the modified J-C model are conducted. The SHPB stress-strain curves and the fracture morphology of SHTB samples from simulations are in good agreement with those from tests.

No abstract