Hafnium oxide (HfO 2) thin films have been made by atomic vapor deposition (AVD) onto Si substrates under different growth temperature and oxygen flow. The effect of different growth conditions on the structure and optical characteristics of deposited HfO 2 film has been studied using X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS), grazing incidence X-ray diffraction (GIXRD) and variable angle spectroscopic ellipsometry (VASE). The XPS measurements and analyses revealed the insufficient chemical reaction at the lower oxygen flow rate and the film quality improved at higher oxygen flow rate. Via GIXRD, it was found that the HfO 2 films on Si were amorphous in nature, as deposited at lower deposition temperature, while being polycrystalline at higher deposition temperature. The structural phase changes from interface to surface were demonstrated. The values of optical constants and bandgaps and their variations with the growth conditions were determined accurately from VASE and XPS. All analyses indicate that appropriate substrate temperature and oxygen flow are essential to achieve high quality of the AVD-grown HfO 2 films.

No abstract

No abstract

The refractive index of AlN has a direct influence on AlGaN-based deep ultraviolet optoelectronic devices, such as the external quantum efficiency of light-emitting devices. Revealing the dependence of the refractive index of AlN on the threading dislocations is meaningful since high-density threading dislocations usually exist in AlN. In this paper, the effect of different dislocation densities on the refractive index of AlN is investigated. With the increase of dislocation densities from 4.24 × 10 8 to 3.48 × 10 9 cm − 2 , the refractive index of AlN decreases from 2.2508 to 2.2102 at 280 nm. Further study demonstrates that the nanoscale strain field around dislocations changes the propagation of light and thus decreases the refractive index of AlN. This study will be beneficial to the design of optoelectronic devices and thus realizing high-performance deep ultraviolet optoelectronic devices. Electronic supplementary material The online version of this article (10.1186/s11671-019-3018-7) contains supplementary material, which is available to authorized users.

No abstract