No abstract

A new data acquisition (DAQ) system for the CAN-DLES experiment was developed using the SpaceWire protocol and the DAQ-Middleware framework. The CANDLES experiment uses a trigger board and Flash Analog-to-Digital Converters (FADCs). The SpaceWire helps us construct the DAQ system with a flexible and multi-path access to FADCs and the trigger board. FADCs have a ring buffer with three buffers to detect sequential decays from backgrounds. We developed the DAQ system with parallel read-out to reduce the dead time at high trigger rates using three read-out personal computers (PCs) that are connected to the three buffers in FADCs one by one. Each PC connects all FADCs and the trigger board and gathers a complete data set of one event without any event builder. The maximum DAQ speed of parallel read-out by three PCs was 2.4 times higher than that of single read-out. In order to collect event data sets from PCs, we built the network distributed DAQ system through Ethernet, which is naturally introduced with the DAQ-Middleware. To realize remote monitoring and histogram modification while the DAQ running, we also developed a dynamic online monitor system independent with the DAQ-Middleware.

No abstract

CANDLES is the project to search for neutrino-less double beta decay (0νββ) of 48 Ca. The observation of 0νββ will prove existence of a massive Majorana neutrino. For the 0νββ measurement, we need a low background condition because of a low decay rate of 0νββ. Now we installed the CANDLES III system at the Kamioka underground laboratory. The CANDLES III system realizes the low background condition by a characteristic structure and data analyses for background rejection. Here we report performances of the CANDLES III system.

No abstract