Soft and stretchable electronic devices are important in wearable and implantable applications because of the high skin conformability. Due to the natural biocompatibility and biodegradability, silk protein is one of the ideal platforms for wearable electronic devices. However, the realization of skin-conformable electronic devices based on silk has been limited by the mechanical mismatch with skin, and the difficulty in integrating stretchable electronics. Here, silk protein is used as the substrate for soft and stretchable on-skin electronics. The original high Young's modulus (5-12 GPa) and low stretchability (<20%) are tuned into 0.1-2 MPa and > 400%, respectively. This plasticization is realized by the addition of CaCl and ambient hydration, whose mechanism is further investigated by molecular dynamics simulations. Moreover, highly stretchable (>100%) electrodes are obtained by the thin-film metallization and the formation of wrinkled structures after ambient hydration. Finally, the plasticized silk electrodes, with the high electrical performance and skin conformability, achieve on-skin electrophysiological recording comparable to that by commercial gel electrodes. The proposed skin-conformable electronics based on biomaterials will pave the way for the harmonized integration of electronics into human.

Noninvasive and seamless interfacing between the sensors and human skin is highly desired for wearable healthcare. Thin-film-based soft and stretchable sensors can to some extent form conformal contact with skin even under dynamic movements for high-fidelity signals acquisition. However, sweat accumulation underneath these sensors for long-term monitoring would compromise the thermal-wet comfort, electrode adherence to the skin, and signal fidelity. Here, we report the fabrication of a highly thermal-wet comfortable and conformal silk-based electrode, which can be used for on-skin electrophysiological measurement under sweaty conditions. It is realized through incorporating conducting polymers poly­(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) into glycerol-plasticized silk fiber mats. Glycerol plays the role of tuning the mechanical properties of silk fiber mats and enhancing the conductivity of PEDOT:PSS. Our silk-based electrodes show high stretchability (>250%), low thermal insulation (∼0.13 °C·m2·W–1), low evaporative resistance (∼23 Pa·m2·W–1, 10 times lower than ∼1.3 mm thick commercial gel electrodes), and high water-vapor transmission rate (∼117 g·m–2·h–1 under sweaty conditions, 2 times higher than skin water loss). These features enable a better electrocardiography signal quality than that of commercial gel electrodes without disturbing the heat dissipation during sweat evaporation and provide possibilities for textile integration to monitor the muscle activities under large deformation. Our glycerol-plasticized silk-based electrodes possessing superior physiological comfortability may further engage progress in on-skin electronics with sweat tolerance.

Transparent electrodes that form seamless contact and enable optical interrogation at the electrode–brain interface are potentially of high significance for neuroscience studies. Silk hydrogels can offer an ideal platform for transparent neural interfaces owing to their superior biocompatibility. However, conventional silk hydrogels are too weak and have difficulties integrating with highly conductive and stretchable electronics. Here, a transparent and stretchable hydrogel electrode based on poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and PEGylated silk protein is reported. PEGylated silk protein with poly(ethylene glycol) diglycidyl ether (PEGDE) improves the Young's modulus to 1.51–10.73 MPa and the stretchability to ≈400% from conventional silk hydrogels (<10 kPa). The PEGylated silk also helps form a robust interface with PEDOT:PSS thin film, making the hydrogel electrode synergistically incorporate superior stretchability (≈260%), stable electrical performance (≈4 months), and a low sheet resistance (≈160 ± 56 Ω sq−1). Finally, the electrode facilitates efficient electrical recording, and stimulation with unobstructed optical interrogation and rat‐brain imaging are demonstrated. The highly transparent and stretchable hydrogel electrode offers a practical tool for neuroscience and paves the way for a harmonized tissue–electrode interface.

and ii) dynamic, in which the amplitude, phase, and frequency of a sample are detected under vibration. [7] These principles inspired conventional bulky benchtop instruments, [8] which are time consuming and limited to well-cut samples with known sizes. Simple and rapid Young's modulus measurements of soft materials with miniaturized platforms are highly demand for improved efficiency and adaptability to new applications, including fast-paced scenarios requiring on-demand and in situ monitoring.Remarkable progress has been made for improved adaptability to new scenarios in the past decades. [9][10][11][12] The static principle has developed indentation methods using theories of contact mechanics such as the Hertz model, [13] which calculates the Young's modulus from force-displacement curves when an indenter presses a stabilized sample regardless of sample sizes. This superiority opens up microscale mechanical characterization such as atomic force microscopy and nanoindentation. [1,9,14,15] However, the force-displacement curves require force sensors, displacement feedback systems, and stabilized samples, limiting to benchtop measurements. Indentation methods also yielded pen-sized and hand-held instruments enabling in vivo study Simple and rapid Young's modulus measurements of soft materials adaptable to various scenarios are of general significance, and they require miniaturized measurement platforms with easy operation. Despite the advances made in portable and wearable approaches, acquiring and analyzing multiple or complicated signals necessitate tethered bulky components and careful preparation. Here, a new methodology based on a self-locked stretchable strain sensor to haptically quantify Young's modulus of soft materials (kPa-MPa) rapidly is reported. The method demonstrates a fingertip measurement platform, which endows a prosthetic finger with human-comparable haptic behaviors and skills on elasticity sensing without activity constraints. A universal strategy is offered toward ultraconvenient and high-efficient Young's modulus measurements with wide adaptability to various fields for unprecedented applications.

Through molecular and structural design, proactively modulated mechano-adaptable devices are shedding light on the next generation of intelligent flexible devices.