This paper presents an energy-efficient approximate adder with a novel hybrid error reduction scheme to significantly improve the computation accuracy at the cost of extremely low additional power and area overheads. The proposed hybrid error reduction scheme utilizes only two input bits and adjusts the approximate outputs to reduce the error distance, which leads to an overall improvement in accuracy. The proposed design, when implemented in 65-nm CMOS technology, has 3, 2, and 2 times greater energy, power, and area efficiencies, respectively, than conventional accurate adders. In terms of the accuracy, the proposed hybrid error reduction scheme allows that the error rate of the proposed adder decreases to 50% whereas those of the lower-part OR adder and optimized lower-part OR constant adder reach 68% and 85%, respectively. Furthermore, the proposed adder has up to 2.24, 2.24, and 1.16 times better performance with respect to the mean error distance, normalized mean error distance (NMED), and mean relative error distance, respectively, than the other approximate adder considered in this paper. Importantly, because of an excellent design tradeoff among delay, power, energy, and accuracy, the proposed adder is found to be the most competitive approximate adder when jointly analyzed in terms of the hardware cost and computation accuracy. Specifically, our proposed adder achieves 51%, 49%, and 47% reductions of the power-, energy-, and error-delay-product-NMED products, respectively, compared to the other considered approximate adders.

This paper proposes a novel approximate adder that exploits an error-reduced carry prediction and constant truncation with error reduction schemes. The proposed adder design techniques significantly improve overall computation accuracy while providing excellent hardware efficiency. Particularly, the proposed carry prediction technique can reduce a prediction error rate by up to 75% compared to existing approximate adders considered in this paper. Furthermore, the error reduction technique also enhances the overall computation accuracy by decreasing the error distance (ED). Our experimental results show that the proposed adder improves the normalized mean ED (NMED) and mean relative ED (MRED) by up to 91.4% and 98.9%, respectively, compared to the other approximate adders. Importantly, an excellent design tradeoff allows the proposed adder to be the most competitive of the adders under consideration. Specifically, the proposed adder achieves up to 95.7%, 91.1%, and 93.2% reductions of the power-NMED, energy-NMED, and area-delay product (ADP)-NMED products, respectively, compared to the other adders. Our adder enhances the power-, energy-, and ADP-MRED products by up to 99.4% compared to the others. In particular, the figure of merit (FoM) considering both hardware and accuracy of the proposed adder is up to 99.95% smaller than that of the other approximate adders considered herein. Furthermore, we confirm that the approximation errors caused by the proposed adder have very little impact on output quality when adopted in practical applications, such as digital image processing and machine learning.

No abstract

STT-RAM (Spin-Transfer Torque Random Access Memory) appears to be a viable alternative to SRAM-based on-chip caches. Due to its high density and low leakage power, STT-RAM can be used to build massive capacity last-level caches (LLC). Unfortunately, STT-RAM has a much longer write latency and a much greater write energy than SRAM. Researchers developed hybrid caches made up of SRAM and STT-RAM regions to cope with these challenges. In order to store as many write-intensive blocks in the SRAM region as possible in hybrid caches, an intelligent block placement policy is essential. This paper proposes an adaptive block placement framework for hybrid caches that incorporates metadata embedding (ADAM). When a cache block is evicted from the LLC, ADAM embeds metadata (i.e., write intensity) into the block. Metadata embedded in the cache block are then extracted and used to determine the block’s write intensity when it is fetched from main memory. Our research demonstrates that ADAM can enhance performance by 26% (on average) when compared to a baseline block placement scheme.

This paper presents a novel low-power joint decoding system composed of a multiple-input multiple-output (MIMO) detector, low-density parity-check (LDPC) channel decoder, and H.264 source decoder for energyaware and cross-layer source-channel transmission systems. Our aim is to achieve a minimum power design that meets the expected quality of service (QoS) at the application layer. This design includes an iterative MIMO-LDPC decoder for minimizing communication errors and an unequal error protection scheme for reducing energy consumption in transmission. The experiment results reveal that our proposed iterative MIMO-LDPC-H.264 joint decoder achieved up to 66% energy reduction with only 0.09 dB peak signal-tonoise ratio degradation when compared to a non-UEP based joint source-channel decoding system.INDEX TERMS MIMO, LDPC, iterative decoding, unequal error protection, H.264/H.265 data partitioning, joint source-channel decoding, low-power design, error resilience, energy-aware communication system, QoS for video processing