No abstract

All-inorganic perovskite quantum dots (PeQDs) have sparked extensive research focus on white-light-emitting diodes (WLEDs), but stability and photoluminescence efficiency issues are still remain obstacles impeding their practical application. Here, we reported a facile one-step method to synthesize CsPbBr 3 PeQDs at room temperature using branched didodecyldimethylammonium fluoride (DDAF) and short-chain-length octanoic acid as capping ligands. The obtained CsPbBr 3 PeQDs have a nearunity photoluminescence quantum yield of 97% due to the effective passivation of DDAF. More importantly, they exhibit much improved stability against air, heat, and polar solvents, maintaining >70% of initial PL intensity. Making use of these excellent optoelectronic properties, WLEDs based on CsPbBr 3 PeQDs, CsPbBr 1.2 I 1.8 PeQDs, and blue LEDs were fabricated, which show a color gamut of 122.7% of the National Television System Committee standard, a luminous efficacy of 17.1 lm/W, with a color temperature of 5890 K, and CIE coordinates of (0.32, 0.35). These results indicate that the CsPbBr 3 PeQDs have great practical potential in wide-color-gamut displays.

Creeping flashover of mineral-oil-impregnated pressboard under impulse stress is a common insulating failure in oil-immersed transformers, arousing increasing attention. Recent studies have shown that the breakdown strength of transformer oil under positive lightning impulse voltage can be significantly improved through nanoparticles-based modification, and Fe3O4 has shown the best improvement in breakdown strength compared to other nanoparticles that have been used. This paper presents the creeping flashover characteristics of pure oil-impregnated pressboard (OIP) and nanofluid-impregnated pressboard (NIP) based on Fe3O4 nanoparticles under positive and negative lightning impulse voltages, respectively. It was found that NIP possessed higher resistance to creeping flashover than OIP. The relative permittivities of oil and oil-impregnated pressboard before and after nanoparticles-based modification were measured, and the results revealed that the addition of nanoparticles led to a better match in relative permittivity between oil and oil-impregnated pressboard, and a more uniform electric field distribution. Furthermore, the shallow trap density in NIP was obviously increased compared to that of OIP through the thermally stimulated depolarization current (TSDC), which promoted the dissipation of surface charges and weakened the distortion of the electric field. Therefore, the creeping flashover characteristics of oil-impregnated pressboard were greatly improved with Fe3O4 nanoparticles.

No abstract

Oil-paper composite insulation (OPCI) is used as the main insulation material in the converter transformer. However, the dielectric properties of insulating oil and oil-impregnated paper are markedly mismatched under direct current (DC) voltage, resulting in an unbalanced distribution of voltage, which is considered to be a major cause of large insulation margin but frequent failures. Therefore, it is necessary to adjust the voltage distribution in OPCI to enhance its breakdown strength. In this work, surface-treated TiO 2 nanoparticles were employed to modify OPCI. The polarisation current tests revealed that by changing the additive amount of nanoparticles, the polarisation intensities of both oil and oil-impregnated paper could be adjusted. Based on this, a model taking relaxation polarisations into full consideration was established to analyse the voltage distribution in OPCI and predict the optimal concentration. The prepared OPCI with the concentration of 0.02 g/L has desired balanced voltage distribution due to the influence of nanoparticles on interface charge, and therefore high breakdown strengths under both DC voltage and polarity reversal voltage, which can be increased by 22.6% at most. This work puts forward a novel idea to improve insulation property of OPCI and provides a reference for broader application of nanomaterial in power equipment. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.