In this paper, a dual-band metamaterial absorber in the terahertz frequencies is proposed and its refractive index sensing characteristics is analyzed. The metamaterial structure is designed using a square metal...

The exceptional resonances excited by symmetry-protected quasi-bound states in the continuum (QBICs) have provided significant potential in high-sensitive sensing applications. Herein, we have proposed a type of metal-insulator-metal (MIM) absorbers supported by QBIC-induced resonances, and the ideal Q-factors of QBIC-induced resonances can be enhanced up to 105 in the THz regime. The coupled mode theory and the multipole scattering theory are employed to thoroughly interpret the QBIC-induced absorption mechanism. Furthermore, the refractive index sensing capacities of the as-presented absorbers have been investigated, where the maximum values of the sensing sensitivity and figure of merit (FOM) can reach up to 187 GHz per refractive index unit and 286, respectively. Therefore, it is believed that the proposed absorbers enabled by QBIC-induced resonances hold promising potential in a broad range of highly demanding sensing applications.

No abstract

In this paper, a dual-band terahertz absorber based on metamaterial structure is designed, fabricated, and measured. The metal periodic array is located on the upper surface of a silicon wafer with a metal ground plane, while the metamaterial structure is created utilizing a square metal ring with four T-shaped metal strips loaded inside of the ring. Two absorption peaks are realized at 0.715 and 1.013 THz with high Q-factors of 152.1 and 98.3, respectively, under normal TE and TM polarized incidence. A prototype of the proposed metamaterial absorber is fabricated by electron beam lithography (EBL) and electron beam evaporation (EBE) technology. Furthermore, a terahertz time-domain spectroscopy (TDS) measurement system is employed to test the absorber sample, with good measurement results obtained. This work provides a new option for the design of multi-band terahertz metamaterial absorbers.

Highly sensitive terahertz (THz) sensing with metasurfaces has attracted considerable attention recently. However, ultrahigh sensing sensitivity remains a huge challenge for practical applications. To improve the sensitivity of these devices, herein we have proposed an out-of-plane metasurface-assisted THz sensor consisting of periodically arranged bar-like meta-atoms. Benefiting from elaborate out-of-plane structures, the proposed THz sensor with high sensing sensitivity of 325 GHz/RIU can be easily fabricated via a simple three-step fabrication process, and the maximum sensing sensitivity can be ascribed to toroidal dipole resonance-enhanced THz-matter interactions. The sensing ability of the fabricated sensor is experimentally characterized by the detection of three types of analytes. It is believed that the proposed THz sensor with ultrahigh sensing sensitivity and its fabrication method might provide great potential in emerging THz sensing applications.