Artificial skin that simultaneously mimics sensory feedback and mechanical properties of natural skin holds substantial promise for next-generation robotic and medical devices. However, achieving such a biomimetic system that can seamlessly integrate with the human body remains a challenge. Through rational design and engineering of material properties, device structures, and system architectures, we realized a monolithic soft prosthetic electronic skin (e-skin). It is capable of multimodal perception, neuromorphic pulse-train signal generation, and closed-loop actuation. With a trilayer, high-permittivity elastomeric dielectric, we achieved a low subthreshold swing comparable to that of polycrystalline silicon transistors, a low operation voltage, low power consumption, and medium-scale circuit integration complexity for stretchable organic devices. Our e-skin mimics the biological sensorimotor loop, whereby a solid-state synaptic transistor elicits stronger actuation when a stimulus of increasing pressure is applied.

No abstract

The world's smallest (0.36 mm 2 ) solid-state CMOS-compatible glucose fuel cell, which exhibits an open-circuit voltage (OCV) of 228 mV and a power generation density of 1.32 µW/cm 2 with a 30 mM glucose solution, is reported in this paper. Compared with conventional wet etching, dry etching (reactive ion etching) for patterning minimizes damage to the anode and cathode, resulting in a cell with a small size and a high OCV, sufficient for CMOS circuit operation.

This paper proposes a self-powered disposable supply-sensing biosensor platform for big-data-based healthcare applications. The proposed supply-sensing biosensor platform is based on bio fuel cells and a 0.23-V 0.25-µm zero-V th alldigital CMOS supply-controlled ring oscillator with a currentdriven pulse-interval-modulated inductive-coupling transmitter. The fully digital, and current-driven architecture uses zero-V th transistors, which enables low voltage operation and a small footprint, even in a cost-competitive legacy CMOS. This enables converterless self-powered operation using a bio fuel cell, which is ideal for disposable healthcare applications. To verify the effectiveness of the proposed platform, a test chip was fabricated using 0.25-µm CMOS technology. The experimental results successfully demonstrate operation with a 0.23-V supply, which is the lowest supply voltage reported for proximity transmitters. A self-powered biosensing operation using organic bio fuel cells was also successfully demonstrated. In addition, an asynchronous inductive-coupling receiver and an off-chip inductor for performance improvement were successfully demonstrated.

This briefpresents the lowest-current fully integrated sub-mm 3 OOK transmitter, the transmission of which is modulated by its supply voltage. By combining the transmitter with a glucose fuel cell that functions as both the power source and sensing transducer, a self-powered continuous glucose monitoring system (CGMS) contact lens can be emerged. The prototype in 55-nm deeply depleted channel CMOS with on-chip inductor and antenna requires an average current of 6.1 nA under 0.32-V supply without any external signal, which demonstrates the potential for self-powered operation.