W artykule opisano zrobotyzowane stanowisko hybrydowe Plazma+MAG. Przedstawiono wstępne wyniki badań złączy spawanych stali obrabianej termomechanicznie o wysokiej granicy plastyczności S700 MC o grubości 10 mm z materiałem dodatkowym. Przeprowadzono badania nieniszczące złączy świadczące o poziomie jakość złącza B wg ISO 12932. Wykonano badania metalograficzne, opisano mikrostrukturę złączy oraz scharakteryzowano twardość w charakterystycznych obszarach złączy. Zmierzono twardość w strefie wpływu ciepła złączy wykonanych z różną energią liniową spawania.

The COVID-19 pandemic created the need for telerehabilitation development, while Industry 4.0 brought the key technology. As motor therapy often requires the physical support of a patient’s motion, combining robot-aided workouts with remote control is a promising solution. This may be realised with the use of the device’s digital twin, so as to give it an immersive operation. This paper presents an extensive overview of this technology’s applications within the fields of industry and health. It is followed by the in-depth analysis of needs in rehabilitation based on questionnaire research and bibliography review. As a result of these sections, the original concept of controlling a rehabilitation exoskeleton via its digital twin in the virtual reality is presented. The idea is assessed in terms of benefits and significant challenges regarding its application in real life. The presented aspects prove that it may be potentially used for manual remote kinesiotherapy, combined with the safety systems predicting potentially harmful situations. The concept is universally applicable to rehabilitation robots.

The use of precision actuators in robotic arm comes from the need to ensure the resulting accuracy of the robot at the maximum speed of movement. The replacement of actuators by means of electrical module allows the use of carrier body of the module for gripping flanges or other modules. Development of new modules is based on the requirement of providing a complete solution for the customer's needs. After the development of new modules, the producer checks the parameters, receives feedback, and uses the authentication options in the independent workplaces, which can provide impartial results. Based on this data, manufacturers can optimize their solutions and deliver the products to market, complying with not only their vision but mainly the needs of customers. This article describes how to verify the characteristics of the modules used in the construction of robotic wrist. It primarily focuses on verification of the accuracy of results and repeatability of position of the wrist on output flange end module. In addition, it presents the design of the testing stand and selection methodologies of measurement. The declared values are compared with the values measured during verification.

Activities in the field of increasing the productivity of the production lines for welding thick metal sheets are focused in two directions. On the one hand, new technologies are being developed for welding, deeper weld penetration and faster welding process. On the other hand are focused on automation of these operations, which have the effect of reducing cost and increasing efficiency. Improved are also the working conditions of people employed in the welding processes. In both these directions the hybrid welding Plasma-GMAW could fulfill all requirements as a new technology. The article gives the concept model of the complete robotized welding cell, in which this method will be implemented and tested.

No abstract