Pressure-driven ultrafiltration membranes are important in separation applications. Advanced filtration membranes with high permeance and enhanced rejection must be developed to meet rising worldwide demand. Here we report nanostrand-channelled graphene oxide ultrafiltration membranes with a network of nanochannels with a narrow size distribution (3-5 nm) and superior separation performance. This permeance offers a 10-fold enhancement without sacrificing the rejection rate compared with that of graphene oxide membranes, and is more than 100 times higher than that of commercial ultrafiltration membranes with similar rejection. The flow enhancement is attributed to the porous structure and significantly reduced channel length. An abnormal pressure-dependent separation behaviour is also reported, where the elastic deformation of nanochannels offers tunable permeation and rejection. The water flow through these hydrophilic graphene oxide nanochannels is identified as viscous. This nanostrand-channelling approach is also extendable to other laminate membranes, providing potential for accelerating separation and water-purification processes.

Graphene and graphene oxide (G-O) have been demonstrated to be excellent filters for various gases and liquids, showing potential applications in areas such as molecular sieving and water desalination. In this paper, the selective trans-membrane transport properties of alkali and alkaline earth cations through a membrane composed of stacked and overlapped G-O sheets ("G-O membrane") are investigated. The thermodynamics of the ion transport process reveal that the competition between the generated thermal motions and the interactions of cations with the G-O sheets results in the different penetration behaviors to temperature variations for the considered cations (K(+), Mg(2+), Ca(2+), and Ba(2+)). The interactions between the studied metal atoms and graphene are quantified by first-principles calculations based on the plane-wave-basis-set density functional theory (DFT) approach. The mechanism of the selective ion trans-membrane transportation is discussed further and found to be consistent with the concept of cation-π interactions involved in biological systems. The balance between cation-π interactions of the cations considered with the sp(2) clusters of G-O membranes and the desolvation effect of the ions is responsible for the selectivity of G-O membranes toward the penetration of different ions. These results help us better understand the ion transport process through G-O membranes, from which the possibility of modeling the ion transport behavior of cellular membrane using G-O can be discussed further. The selectivity toward different ions also makes G-O membrane a promising candidate in areas of membrane separations.

Two-dimensional layered materials have joined in the family of size-selective separation membranes recently. Here, chemically exfoliated tungsten disulfide (WS2) nanosheets are assembled into lamellar thin films and explored as an ultrafast separation membrane for small molecules with size of about 3 nm. Layered WS2 membranes exhibit 5- and 2-fold enhancement in water permeance of graphene oxide membranes and MoS2 laminar membranes with similar rejection, respectively. To further increase the water permeance, ultrathin nanostrands are used as templates to generate more fluidic channel networks in the WS2 membrane. The water permeation behavior and separation performance in the pressure loading-unloading process reveal that the channels created by the ultrathin nanostrands are cracked under high pressure and result in a further 2-fold increase of the flux without significantly degrading the rejection for 3 nm molecules. This is supported by finite-element-based mechanical simulation. These layered WS2 membranes demonstrate up to 2 orders of magnitude higher separation performance than that of commercial membranes with similar rejections and hold the promising potential for water purification.

The fracture of polycrystalline graphene is explored by performing molecular dynamics simulations with realistic finite-grain-size models, emphasizing the role of grain boundary ends and junctions. The simulations reveal a ~50% or more strength reduction due to the presence of the network of boundaries between polygonal grains, with cracks preferentially starting at the junctions. With a larger grain size, a surprising systematic decrease of tensile strength and failure strain is observed, while the elastic modulus rises. The observed crack localization and strength behavior are well-explained by a dislocation-pileup model, reminiscent of the Hall-Petch effect but coming from different underlying physics.

Sn O 2 nanowires synthesized by thermal evaporation method are investigated as a possible anode electrode for Li-ion batteries. In the first discharge process, the capacity of Li ions is 2133mAhg−1, which is much more than the theoretical total capacity of the bulk SnO2, 1494mAhg−1. During the successive 15cycles, the reversible capacity stays in the range of 1250–700mAhg−1 with a capacity fading of 3.89%percycle at a constant current density of 0.5mAcm−2. These results demonstrate that SnO2 nanowires are a promising anode material for Li-ion battery applications.