We demonstrated the synthesis and characterization of two conjugated copolymers, PBDTFBZO and PBDTFBZS, consisting of dialkylthiol substituted benzo[1,2-b:4,5-b']dithiophene donor and monofluorinated benzotriazole acceptor blocks. The resulting copolymers show large band gaps, deep HOMO and LUMO energy levels. Improved V(oc), J(sc), and FF were obtained at the same time to increase overall efficiencies of their single and tandem polymer solar cells. The enhanced V(oc) can be ascribed to a low-lying HOMO energy level by incorporating dialkylthiol and fluorine substituents on the polymer backbone. The improvement in J(sc) and FF are likely due to high carrier mobility, suppressed charge recombination, and fine nanostructure morphology. A 7.74% PCE was achieved from the regular single device based on PBDTFBZS:PC71BM blend film with 3% 1,8-diiodooctane (DIO) additive. In combination with low band gap diketopyrrolopyrrole (DPP)-based copolymer, tandem devices based on PBDTFBZS exhibited high PCE up to 9.40%. The results indicate that PBDTFBZO and PBDTFBZS are promising polymer donor materials for future application of large-area polymer solar cells.

A novel-small molecular acceptor with electron-deficient 1,3,5-triazine as the core and perylene diimides as the arms is developed as the acceptor material for efficient bulk heterojunction organic solar cells with an efficiency of 9.15%.

Conjugated copolymers based on isoindigo/fluorinated isoindigo and bis(dialkylthienyl)benzodithiophene, PBDTT-ID and PBDTT-FID, were designed and synthesized for organic photovoltaic applications. The isoindigo fluorination made PBDTT-FID show high PCE of 5.52% and 7.04% in its conventional and inverted PSCs, respectively.

A novel wide-bandgap copolymer of PBDT-ODZ based on benzo[1,2-b:4,5-b' ]dithiophene (BDT) and 1,3,4-oxadiazole (ODZ) blocks is developed for efficient nonfullerene polymer solar cells (NF-PSCs). PBDT-ODZ exhibits a wide bandgap of 2.12 eV and a low-lying highest occupied molecular orbital (HOMO) level of -5.68 eV, which could match well with the low-bandgap acceptor of 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(4-hexylthienyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']-dithiophene (ITIC-Th), inducing a good complementary absorption from 300 to 800 nm and a minimal HOMO level offset (0.1 eV). The PBDT-ODZ:ITIC-Th devices exhibit a large open-circuit voltage (V ) of 1.08 eV and a low energy loss (E ) of 0.50 eV, delivering a high power conversion efficiency (PCE) of 10.12%. By adding a small amount of copper(I) iodide (CuI) as an additive to form coordination complexes in the active blends, much higher device performances are achieved due to the improved absorption and crystallinity. After incorporating 4% of CuI, the PCE is elevated to 12.34%, with a V of 1.06 V, a J of 17.1 mA cm and a fill factor of 68.1%. This work not only provides a novel oxadiazole-containing wide-bandgap polymeric donor candidate for high-performance NF-PSCs but also presents an efficient morphology-optimization approach to elevate the PCE of NF-PSCs for future practical applications.

A series of star‐shaped small molecular cathode interlayer materials are synthesized for PTB7:PC71BM based polymer solar cells (PSCs), comprising neutral amino groups, quaternary ammonium ions, amino N‐oxides, and sulfobetaine ions as pendant polar functionalities, respectively. For the first time, the effect of these different pendant functional groups with or without mobile counterions on the cells' photovoltaic properties is investigated in detail. A large improvement in device performance is observed by inserting these cathode interfacial layers (CILs) between the PTB7:PC71BM active layer and the Al electrode. The CILs could effectively lower the work function of the Al cathode, increase the built‐in potential, and decrease the series resistance of the related PSCs. poly(9,9‐dioctylfluorene‐co‐N‐[4‐(3‐methyl‐propyl)]‐diphenylamine) with pendant quaternary ammonium ions shows the best cathode modification ability, giving rise to the highest power conversion efficiency of 10.1%, even better than that of the typical poly[(9,9‐bis(3′‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐2,7‐(9,9‐dioctylfluorene)] based device. The design strategy and structure–property relationships concluded in this work will be helpful to develop more efficient cathode interface materials for high‐performance PSCs in the future.