An increasing number of studies directed at supercooling water droplets on surfaces with different wettabilities have appeared in recent years. This activity has been stimulated by the recognition that water supercooling phenomena can be effectively used to develop methods for protecting outdoor equipment and infrastructure elements against icing and snow accretion. In this article, we discuss the nucleation kinetics of supercooled sessile water droplets on hydrophilic, hydrophobic, and superhydrophobic surfaces under isothermal conditions at temperatures of -8, -10, and -15 °C and a saturated water vapor atmosphere. The statistics of nucleation events for the ensembles of freezing sessile droplets is completed by the detailed analysis of the contact angle temperature dependence and freezing of individual droplets in a saturated vapor atmosphere. We have demonstrated that the most essential freezing delay is characteristic of the superhydrophobic coating on aluminum, with the texture resistant to contact with ice and water. This delay can reach many hours at T = -8 °C and a few minutes at -23 °C. The observed behavior is analyzed on the basis of different nucleation mechanisms. The dissimilarity in the total nucleation rate, detected for two superhydrophobic substrates having the same apparent contact angle of the water drop but different resistivities of surface texture to the contact with water/ice, is associated with the contribution of heterogeneous nucleation on external centers located at the water droplet/air interface.

In this work, we present a modification of a stainless steel surface to impart superhydrophobic properties to it that are robust with respect to mechanical stresses associated with cyclic icing/deicing treatment, as well as to long-term contact with aqueous media and high humidity. The durability of the superhydrophobic state is ensured by the texture with multimodal roughness stable against mechanical stresses and a 2D polymer network of fluorooxysilane chemically bound to the texture elements. The designed superhydrophobic coating is characterized by contact angles exceeding 155° and a maximum rolling angle of 42° after 100 icing/deicing cycles.

Superhydrophobic surfaces are attractive as self-cleaning protective coatings in harsh environments with extreme temperatures and pH levels. Hexagonal phase boron nitride (h-BN) films are promising protective coatings due to their extraordinary chemical and thermal stability. However, their high surface energy makes them hydrophilic and thus not applicable as water repelling coatings. Our recent discovery on the superhydrophobicity of boron nitride nanotubes (BNNTs) is thus contradicting with the fact that BN materials would not be hydrophobic. To resolve this contradiction, we have investigated BNNT coatings by time-dependent contact angle measurement, thermogravimetry, IR spectroscopy, and electron microscopy. We found that the wettability of BNNTs is determined by the packing density, orientation, length of nanotubes, and the environmental condition. The origins of superhydrophobicity of these BNNT coatings are identified as (1) surface morphology and (2) hydrocarbon adsorbates on BNNTs. Hydrocarbon molecules adsorb spontaneously on the curved surfaces of nanotubes more intensively than on flat surfaces of BN films. This means the surface energy of BNNTs was enhanced by their large curvatures and thus increased the affinity of BNNTs to adsorb airborne molecules, which in turn would reduce the surface energy of BNNTs and make them hydrophobic. Our study revealed that both high-temperature and UV-ozone treatments can remove these adsorbates and lead to restitution of hydrophilic BN surface. However, nanotubes have a unique capability in building a hydrophobic layer of adsorbates after a few hours of exposure to ambient air.

In view of more and more extending areas of application of hydrophobic and superhydrophobic materials and coatings, the problem of degradation of superhydrophobic state becomes extremely important. In this paper, the results of studies of time evolution of water contact angle on some siloxane-based hydrophobic and superhydrophobic surfaces in the conditions of long-term continuous contact with water are presented. Different mechanisms responsible for reversible and nonreversible deterioration of contact angle values were discussed and experimentally verified. We noted that evolution of water contact angle in time in the conditions of continuous contact with water needs to be considered when studying the durability of superhydrophobic coating because of its high sensitivity to the state of the coating and the details of its chemical structure.

Femtosecond laser treatment of a glass surface was used to fabricate a multimodal roughness having regular surface ripples with a period of a few micrometers decorated by aggregates of nearly spherical nanoparticles. UV-ozone treatment followed by chemisorption of the appropriate functional fluorosilanes onto the textured surface makes it possible to fabricate a superhydrophobic coating with a specific surface resistance on the order of petaohms on a glass surface. The main advantage of the fabricated coating under severe operating conditions with abrasion loads is the significant durability of its electro-insulating properties. The longevity of the high surface resistivity, even on long-term contact with a water vapor-saturated atmosphere, is directly related to the peculiarities of the surface texture and ripple structure.