Design and fabrication of miniature compliant hinges for multi-material compliant mechanisms

Abstract

Multi-material molding (MMM) enables the creation of multi-material mechanisms that combine compliant hinges, serving as revolute joints, and rigid links in a single part. There are three important challenges in creating these structures: (1) bonding between the materials used, (2) the ability of the hinge to transfer the required loads in the mechanism while allowing for the prescribed degree(s) of freedom, and (3) incorporating the process-specific requirements in the design stage. This paper presents the approach for design and fabrication of miniature compliant hinges in multi-material compliant mechanisms. The methodology described in this paper allows for concurrent design of the part and the manufacturing process. For the first challenge, mechanical interlocking strategies are presented. For the second challenge, development of a simulation-based optimization model of the hinge is presented, involving functional and manufacturing constrains. For the third challenge, the development of hinge positioning features and gate positioning constraints is presented. The developed MMM process is described, along with the main constraints and performance measures. This includes the process sequence, the mold cavity design, gate selection and runner system development. A case study is presented to demonstrate the feasibility of creating multi-material mechanisms with miniature hinges serving as joints through MMM process. The approach described in this paper was utilized to design a drive mechanism for a flapping wing micro air vehicle. Methods described in this paper are applicable to any lightweight, load-bearing compliant mechanism manufactured using multimaterial injection molding.

Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing

“…Several authors have also investigated the use of multimaterial molding (MMM) for the creation of multiple material compliant mechanisms [38][39][40]. MMM is a process whereby the various materials in the final part are created volumetrically, as opposed to the layer-by-layer methods of both AM and SDM.…”

Topology Optimization of 3-DOF Peristaltic Structure Robot Based on Vector Continuous Mapping Matrix

“…They generate smooth and continuous displacement without backlash. So flexure joints are usually used to compose the structure of micro-/nanoequipment named as compliant mechanisms [1,2]. However, compliant mechanisms cannot finish spatial multidimensional motion characteristics.…”

Design and Fabrication of a Soft Robotic Hand With Embedded Actuators and Sensors

“…Examples are shape deposition manufacturing (SDM) [23,24], laser cutting [25,26], 3D printing, etc. The SDM approach is an RP technique which is able to fabricate heterogeneous structures, such as multimaterial structures with embedded components.…”