Electrical properties of high resistivity 6H–SiC under high temperature/high field stress

Abstract

The influence of ambient temperature and applied electric field on the electrical properties of high resistivity (1–30 kΩ cm), semi-insulating (>100 kΩ cm), and insulating (1011–1012 Ω cm) single-crystal 6H–SiC is reported. Current–voltage (I–V) characteristics of lateral metal-semiconductor-metal test structures were measured in vacuum in a temperature range of 295–730 K and under moderate pulsed electric fields (0.5–80 kV/cm). It is shown that the resistivity of the undoped 6H–SiC varies strongly with the ambient temperature after a temperature/field function dominated by a factor containing the activation (ionization) energy of residual boron of 0.35 eV. The dominant activation energy of semi-insulating Vanadium-compensated material (6H–SiC:V) varies with the ambient temperature, increasing from ∼0 eV at 295–320 K to ∼0.8 eV at T⩾600 K. This result can explain the relatively low decrease of the resistivity of insulating 6H–SiC at very high ambient temperatures and its viability as a substrate for next-generation high temperature microwave integrated circuits based on large band gap semiconductors.

Ultrafast-Contactless Flash Sintering using Plasma Electrodes

“…This is hypothesized to be due to the slope of resistivity vs temperature curve for B 4 C being relatively constant 20 . In contrast to SiC, which tends to show a sudden drop in resistance 21 when the semiconductor reaches its intrinsic region at temperatures exceeding 1400 °C.…”

Axial Temperature Behavior of a Heat Exchanger Tube for Microwave Thermal Rockets

“…That experiment was interesting; however repeatable results were unobtainable. Future work involving doping silicon carbide with vanadium to change the dielectric loss would be useful toward developing a microwave thermal thruster, and the current laboratory setup is suitable for such an endeavor [7]. …”

Plasticity‐Controlled Friction and Wear in Nanocrystalline SiC

“…Silicon carbide (SiC) exhibits good resistance to corrosive environments, is stable at high temperatures, and has excellent mechanical properties, for example, high hardness. These properties make SiC a promising materials for such applications as high‐temperature coatings and microelectromechanical system .…”