A compact mid-infrared channel waveguide laser is demonstrated in Cr:ZnS with a view to power scaling chromium laser technology utilizing the thermo-mechanical advantages of Cr:ZnS over alternative transition metal doped II-VI semiconductor laser materials. The laser provided a maximum power of 101 mW of CW output at 2333 nm limited only by the available pump power. A maximum slope efficiency of 20% was demonstrated.

The authors present a mid-IR depressed cladding waveguide laser in Fe:ZnSe. The laser produced a maximum output power of 76 mW at 4122 nm and laser thresholds as low as 154 mW were demonstrated. This represents a 44% reduction in threshold power compared with the bulk laser system demonstrated in this paper. The waveguide laser was found to have a narrow spectral linewidth of 6 nm FHWM compared to the 50 nm typical of bulk Fe:ZnSe lasers.

A high repetition rate Q-switched modelocked ~2.1 µm monolithic waveguide laser is reported. Ultrafast laser inscription is used to fabricate 3D depressed cladding channel waveguides in holmium doped yttrium aluminium garnet. This results in a transversely single mode waveguide laser. With the use of a graphene based saturable output coupler, Q-switched modelocking was achieved with a pulse repetition frequency of 5.9 GHz and up to 170 mW of average output power. This first demonstration of multi-GHz repetition rate operation from a Ho:YAG laser provides a compact and convenient source for a number of applications.

We report demonstration of Watt level waveguide lasers fabricated using Ultrafast Laser Inscription (ULI). The waveguides were fabricated in bulk chromium and iron doped zinc selenide crystals with a chirped pulse Yb fiber laser. The depressed cladding structure in Fe:ZnSe produced output powers of 1 W with a threshold of 50 mW and a slope efficiency of 58%, while a similar structure produced 5.1 W of output in Cr:ZnSe with a laser threshold of 350 mW and a slope efficiency of 41%. These results represent the current state-of-the-art for ULI waveguides in zinc based chalcogenides.

We report fabrication and operation of multi-watt level waveguide lasers utilizing holmium-doped yttrium aluminum garnet (Ho:YAG). The waveguides were fabricated using ultrafast laser inscription, which relies on a chirped pulse ytterbium fiber laser to create depressed cladding structures inside the material. A variety of waveguides were created inside the Ho:YAG samples. We demonstrate output powers of ∼2  W from both a single-mode 50 μm waveguide laser and a multimode 80 μm waveguide laser. In addition, laser action from a co-doped Yb:Ho:YAG sample under in-band pumping conditions was demonstrated.