Real time monitoring and control of a modern power system has achieved significant development since the incorporation of the phasor measurement unit (PMU). Due to the time-synchronized capabilities, PMU has increased the situational awareness (SA) in a wide area measurement system (WAMS). Operator SA depends on the data pertaining to the real-time health of the grid. This is measured by PMUs and is accessible for data analytics at the data monitoring station referred to as the phasor data concentrator (PDC). Availability of the communication system and communication delay are two of the decisive factors governing the operator SA. This paper presents a pragmatic metric to assess the operator SA and ensure optimal locations for the placement of PMUs, PDC, and the underlying communication infrastructure to increase the efficacy of operator SA. The uses of digital elevation model (DEM) data of the surface topography to determine the optimal locations for the placement of the PMU, and the microwave technology for communicating synchrophasor data is another important contribution carried out in this paper. The practical power grid system of Bihar in India is considered as a case study, and extensive simulation results and analysis are presented for validating the proposed methodology.
The conventional electrical grid is undergoing substantial growth for reliable grid operation and for more efficient and sustainable energy use. The traditional grid is now metamorphosing into a smart grid (SG) that incorporates a diverse, heterogeneous blend of operating measures such as smart appliances, meters, and renewable energy resources. With better efficient results and dependability, the SG can be described as a modern electric power grid architecture. The SG is one of the greatest potential advances as a promising solution for the energy crisis. However, it is complex and its decentralization could be of tremendous benefit. Moreover, digitalization and integration of a large number of growing connections make it a target of cyber-attacks. In this sense, blockchain is a promising SG paradigm solution that offers several excellent features. There has been considerable effort put into using blockchains in the smart grid for its decentralization and enhanced cybersecurity; however, it has not been thoroughly studied in both application and architectural perspectives. An in-depth study was conducted on blockchain-enabled SG applications. Blockchain architectures for various applications, such as the synchrophasor applications, electric vehicles, energy management systems, etc., were proposed. The purpose of this article is to provide directions for future research efforts aimed at secure and decentralized SG applications using blockchain.
The automatic load frequency control for multi-area power systems has been a challenging task for power system engineers. The complexity of this task further increases with the incorporation of multiple sources of power generation. For multi-source power system, this paper presents a new heuristic-based hybrid optimization technique to achieve the objective of automatic load frequency control. In particular, the proposed optimization technique regulates the frequency deviation and the tie-line power in multi-source power system. The proposed optimization technique uses the main features of three different optimization techniques, namely, the Firefly Algorithm (FA), the Particle Swarm Optimization (PSO), and the Gravitational Search Algorithm (GSA). The proposed algorithm was used to tune the parameters of a Proportional Integral Derivative (PID) controller to achieve the automatic load frequency control of the multi-source power system. The integral time absolute error was used as the objective function. Moreover, the controller was also tuned to ensure that the tie-line power and the frequency of the multi-source power system were within the acceptable limits. A two-area power system was designed using MATLAB-Simulink tool, consisting of three types of power sources, viz., thermal power plant, hydro power plant, and gas-turbine power plant. The overall efficacy of the proposed algorithm was tested for two different case studies. In the first case study, both the areas were subjected to a load increment of 0.01 p.u. In the second case, the two areas were subjected to different load increments of 0.03 p.u and 0.02 p.u, respectively. Furthermore, the settling time and the peak overshoot were considered to measure the effect on the frequency deviation and on the tie-line response. For the first case study, the settling times for the frequency deviation in area-1, the frequency deviation in area-2, and the tie-line power flow were 8.5 s, 5.5 s, and 3.0 s, respectively. In comparison, these values were 8.7 s, 6.1 s, and 5.5 s, using PSO; 8.7 s, 7.2 s, and 6.5 s, using FA; and 9.0 s, 8.0 s, and 11.0 s using GSA. Similarly, for case study II, these values were: 5.5 s, 5.6 s, and 5.1 s, using the proposed algorithm; 6.2 s, 6.3 s, and 5.3 s, using PSO; 7.0 s, 6.5 s, and 10.0 s, using FA; and 8.5 s, 7.5 s, and 12.0 s, using GSA. Thus, the proposed algorithm performed better than the other techniques.
Metamaterial absorbers are used in the terahertz frequency regime as photo-detectors, as sensing elements, in imaging applications, etc. Narrowband absorbers, on account of their ultra-slender bandwidth within the terahertz frequency spectrum, show a significant shift in the absorption peak when an extrinsic entity relative to the absorber, like refractive index or temperature of the encircling medium, is altered. This property paves the path for the narrowband absorbers to be used as potential sensors to detect any alterations in the encircling medium. In this paper, a novel design of a terahertz metamaterial (MTM) absorber is proposed, which can sense the variations in the refractive index (RI) of the surrounding medium. The effective permeability of the structure is negative, while its permittivity is positive; thus, it is a μ-negative metamaterial. The layout involves a swastika-shaped design made of gold on top of a dielectric gallium arsenide (GaAs) substrate. The proposed absorber achieved a nearly perfect absorption of 99.65% at 2.905 terahertz (THz), resulting in a quality factor (Q-factor) of 145.25. The proposed design has a sensitivity of 2.12 THz/RIU over a range of varied refractive index from n = 1.00 to n = 1.05 with a step size of 0.005, thereby achieving a Figure of Merit (FoM) of 106. Furthermore, the sensor was found to have a polarization-insensitive characteristic. Considering its high sensitivity (S), the proposed sensor was further tested for gas sensing applications of harmful gases. As a case study, the sensor was used to detect chloroform. The proposed work can be the foundation for developing highly sensitive gas sensors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.