PMMA bone cements are mainly used to fix implanted prostheses and are introduced as a fluid mixture, which hardens over time. The problem of infected prosthesis could be solved due to the development of some new antibacterial bone cements. In this paper, we show the results obtained to develop four different modified PMMA bone cements by using antimicrobial additives, such as gentamicin, peppermint oil incorporated in hydroxyapatite, and silver nanoparticles incorporated in a ceramic glass matrix (2 and 4%). The structure and morphology of the modified bone cements were investigated by SEM and EDS. We perform experimental measurements on wettability, hydration degree, and degradation degree after immersion in simulated body fluid. The cytotoxicity was evaluated by MTT assay using the human MG-63 cell line. Antimicrobial properties were checked against standard strains Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. The addition of antimicrobial agents did not significantly affect the hydration and degradation degree. In terms of biocompatibility assessed by the MTT test, all experimental PMMA bone cements are biocompatible. The performance of bone cements with peppermint essential oil and silver nanoparticles against these two pathogens suggests that these antibacterial additives look promising to be used in clinical practice against bacterial infection.

The novelty of this study consists of the formulation and characterization of three experimental bleaching gels with hydroxylapatite oxides and fluorine (G28®, G29®, G30®) based on natural fruit extracts compared to the commercial Opalescence 15% (GC, Ultradent, South Jordan, UT, USA). Studies have been conducted on the effect that the experimental bleaching gels have on the color and morphology of different restorative materials (Nanofill®-Schulzer, P.L. Superior Dental Materials GmbH, Hamburg, Germany, and experimental nanocomposites (P11®, P31®, P61®)), immersed in coffee and artificial saliva (for 10 days and 30 days). The study also includes a cytotoxicity test on the gels and nanocomposites after bleaching, with ISO 109993-5 protocols on human dental follicle stem cells. UV-VIS spectroscopy, computerized measurement, and fluorescence spectrometry were used in order to observe the color changes, while the microstructure of the surface was investigated by Scanning Electron Microscopy (SEM). All of the samples immersed in coffee showed the highest color shift in comparison to the baseline. The color difference ΔE values obtained using the two methods (UV-Vis, computerized based on digital images) both after coloring and bleaching, respectively, were different for all four types of nanocomposites stored in the coffee, while no difference was observed in those stored in artificial saliva. The studied experimental gels and nanocomposites had a low cytotoxic effect on cell cultures after bleaching.

The developement and regeneration of healthy bone tissue is a complex process that includes the interaction of different cell types and requires a set of coordinated processes. The loss of bone tissue may occur due to various reasons: surgical removal, bone trauma (i.e., fractures) or systemic bone loss (i.e., osteoporosis). When the natural bone tissue is destroyed, the regeneration capacity of the bone is not always satisfactory. The result consists therefore in many functional and structural aberrations. In order to improve and accelerate the healing process, bone substitutes have been developed. Hydroxyapatite has been widely used in bone applications due to its excellent biocompatibility, osteoconductivity and bioactivity [1,2]. The objective of this research is to obtain a new composite biomaterial that can be used as bone substitute. In this study, bovine hydroxyapatite obtained from freshly calcined bovine femur was used. The objective of this research is to obtain a new composite biomaterial that can be used as bone substitute. The experimental composite samples were obtained using bovine hydroxyapatite as matrix and tricalcium phosphate, respectively, magnesium oxide as reinforcement materials. The synthesis process of these new biomaterial composites, the effect of chemical composition, surface structure, chemical and phase composition as well as mechanical features have been investigated.

The failure of hip prostheses is a problem that requires further investigation and analysis. Although total hip replacement is an extremely successful operation, the number of revision surgeries needed after this procedure is expected to continue to increase due to issues with both bone cement types and cementation techniques (depending on the producer). To conduct a comparative analysis, as a surgeon prepared the bone cement and introduced it in the body, this study’s team of researchers prepared three types of commercial bone cements with the samples mixed and placed them in specimens, following the timeline of the surgery. In order to evaluate the factors that influenced the chemical composition and structure of each bone cement sample under specific intraoperative conditions, analyses of the handling properties, mechanical properties, structure, and composition were carried out. The results show that poor handling can impede prosthesis–cement interface efficacy over time. Therefore, it is recommended that manual mixing be avoided as much as possible, as the manual preparation of the cement can sometimes lead to structural unevenness.

The immersed components of hydroelectric power plants are permanently in contact with the water stream and their wear occurs by corrosion, erosion and cavitation. This damage is usually repaired by welding: the procedure is fast and reduces plant downtime. Adopting proper weld procedures are crucial for blade performance and to establish a protocol the following experiment was devised: rectangular samples 600x200x15mm were obtained from a discarded blade used in a hydroelectric power plant and in the median region a 3mm deep groove was milled to simulate erosion damage. The damage was repaired by welding using MIG, WIG, MMAW and oxyacetylene techniques using 136L as filler on cold and preheated at 400�C base materials. Specimens from the welded ensembles were obtained and prepared accordingly for corrosion testing. Post corrosion testing studies using the light microscope and scanning electron microscope were performed in order to determine surface damage. At first glance results appear contradictory: the corrosion test results revealed best behavior for MIG weld repairs, on the cold sample, while the corrosion features measured on the exposed area revealed that oxyacetylene welding would be best. Complementary methods are required and currently employed to establish optimum welding procedure parameters for water turbine blade repairs.